Thread: IMPORTANT! If you want HELP in case of a bricked Garmin device, please follow this

Hi all!
I am in trouble...
I have a Garmin nuvi 1410 and it is not recognized by the PC, "the USB device is not recognized".

I wanted to make a CURE with the GarminCure kunix software but it was impossible for the PC to recognize it again even in preboot mode..

Then I decided to update the firmware through an SD card, the GPS had version 5.80 and I decided to take it to 6.10:
What I did was download the file nuvi13xxand14xxseries_GCDFile__610.gcd and rename it as gupdate.gcd, place it inside a folder named "Garmin" and paste the folder in the root of the card. When I put it on the gps off and then turn it on it took the update and installed perfectly, but it was still not recognized by the PC, so I decided to install the CURE firmware.

With the GarminCure3, I created the corresponding CURE .rgn file with the nuvi13xxand14xxseries_GCDFile__620.gcd and then with the RGN_Tool_V094 transform it into .gcd. I placed it renamed as gupdate.gcd (the CURE firmware) and it got stuck forever on the Garmin screen.

Before doing the CURE I took these photos:

[Only registered and activated users can see links. ]

Does anyone have any idea what I can do to solve this problem?
Thank you!
Removed Unit ID number from top image and fixed images to display properly. Disclosing your device's UID publicly can be dangerous.