Thread: IMPORTANT! If you want HELP in case of a bricked Garmin device, please follow this

Originally Posted by sorinnitoiu

Hi all,
i have an garmin drive 40 lmt, and accidentaly i formatting the internal memory as NTFS. After that, the device remain in garmin the logo screen.
I used cure3 to flash it and i reformatted in the fat32 the internal memory, and then i coppied the files from another device to internal memory, but still dont work.
In preboot mode, the garmin express communicate with the device, recognise him and make the update, but afther that, nothing change
HWID 2262
The firmware is 5.60
Can You help, please!

It would seem from that info that you still have the cure firmware loaded. Cure fw CANNOT boot the device, it will only allow Mass Storage Mode so corrupt files can be removed/replaced, or, in your case, a proper FAT32 reformat done using RMPrepUSB. You probably only need to load now the original fw back to the device in preboot.