Thread: About 37xx converted to 34xx satellites reception accuracy

Originally Posted by giuseppe66

In my test i've see that is not important how many satellities you have but how many signal you have on i single satellites. another test that i've do is for receive more satellites: i've delete all files in GPS directory then turn ON and (on open space), go to secret menu and select EPHER....and COLD.. and wait for 10-15 minutes for best reception without go out from that menu. I've see the reception of all satellites but accuracy always 8 - 12 about. So i've understund that accuracy is depending from quality and not from number

Hello,

Exactly, I agree with you.

Guys, look my sattelite page:

[Only registered and activated users can see links. ]

All the time my signal looks worse just running slowly. This was my better accuracy today.
The image above I was stopped with sky clear and no clouds.

PS: I was using your GPS files @lolypop000. So looks me worse than the other GPS files that @catymag share with us.
PS2: I will flash again the original 37XX firmware just to compare the satellite page.

[]'s

Originally Posted by rfb

Hello,

Exactly, I agree with you.

Guys, look my sattelite page:

[Only registered and activated users can see links. ]

All the time my signal looks worse just running slowly. This was my better accuracy today.
The image above I was stopped with sky clear and no clouds.

PS: I was using your GPS files @lolypop000. So looks me worse than the other GPS files that @catymag share with us.
PS2: I will flash again the original 37XX firmware just to compare the satellite page.

[]'s

Hello,

Look the image below:

[Only registered and activated users can see links. ]


Just flashed back the original 37XX firmware.
When I did that screenshot, I was moving during a big thunderstorm and a lot of trees between me and the sky.
So comparing the accuracy, the diference is so big! Same day, same places, just diferent firmwares.
Now the signal have a lot of power....


[]'s

Originally Posted by rfb

Hello,

Look the image below:

[Only registered and activated users can see links. ]


Just flashed back the original 37XX firmware.
When I did that screenshot, I was moving during a big thunderstorm and a lot of trees between me and the sky.
So comparing the accuracy, the diference is so big! Same day, same places, just diferent firmwares.
Now the signal have a lot of power....


[]'s

This is how it should be !
Try to flash 3490 Version 3.6 to check accuracy on a much older version.
If it's good on 3.6 then try to 7.1 then to 7.5 then to 7.6
I have a feeling that 3.6 is using different GPS Firmware because it creates different files in GPS folder.