Thread: 2xxx and 3xxx series enable features application

You seem to have this tut confused with the region 41 NV backup one, as your post mentions 41.bin and your images show this:





Of course it can't work. You've saved 41.bin instead of 140.bin and then tried to mod the ldr.bin. Start over again, delete everything you've done [but save a copy of your 41.bin as it could help you if your nuvi ever bricks]. Re-read the tut in Post #1 here and note which features you need to check. TTS for instance is required to be enabled or you'll lose the spoken street names. I'd check everything except ASR (your unit doesn't have Speech Recognition) and EcoRoute Purchase and HD.

1- Hmm, with the RGN_Tool the only thing I can open is the file (GUpdate.gcd) of about 40Mb. Once I do it I get the following from the picture below so then I click save and it creates a 752Kb (Boot.bin) file.
[Only registered and activated users can see links. ]

2- According to what I've read, I had to rename this boot file to (ldr.bin) then place it on my SD card in (Garmin\Updater\1371) along a text file named (Updater.txt) with the following below written in it:
rrgn,41,1:/41.bin
reboot

3- After I just shutdown the GPS and restart it. It then creates a backup file at the root of my SD card and it names it (41.bin) as it's what the updater.txt told him to do.

4- Now I open the modding tool and check the boxes you told me on the 41.bin file that is at the root of my SD card. I even did it for the ldr.bin so both have the same features enabled, then I reboot the unit again... but it doesn't do anything. I even tryed to change (rrgn,41,1:/41.bin) by (xrgn,41,1:/41.bin) as a backup tutorial I've found said it was the way to tell the gps to restore the updated 41.bin file you just edited, into the gps yet it still doesn't work.

Something is wrong within these steps which I am told to do from what I've read in the tutorial but I can't tell where exactly x_x

Edit: I ended up going in another thread which I already been before but somehow forgot about it. The tutorial at the link below is wayyy more simple and straight forward. I just download the right version, unrar it to an SD card, edit the 140.bin if I want to then I reboot the device and it finaly worked at last! :D Still thanks for your time.
[Only registered and activated users can see links. ]