Thread: GarminCure3 tool - the new way to create cure firmwares for Garmin devices

The Cure is only designed to make you see the internal flash drive. The Cure is not bootable.
Once you have used the cure to access the internal flash drive you need to remove the corrupt file or files or format your internal drive as needed. Always delete or rename GUPDATE.GDC from the device (This is not optional).
(What did you do just before the nuvi bricked, did you load a Map ?, Did you load a voice ?).
Next step is to use the cure program to make Original Firmware (Look at picture in first post on this page).
Next flash the original firmware. To get your nuvi into pre-boot mode you dont need clips or rubbers or anything like that.
Switch the nuvi OFF, Hold Your finger on the screen top left , Plug in the usb cable. (Power switch not needed)

You can also try to flash your logo.bin
Read this thread.
[Only registered and activated users can see links. ]