Thread: Nuvi Pre-boot Mode

Sorry about the dumb question but which one Updater.exe to get?

Here you can create cure and original FW and also you have updater.exe inside:

[Only registered and activated users can see links. ]

I've used exactly the same link (same exe's) without success. The only not tried it is via changing/adding memory card.

Thank you very much for your effort!

Look at garmindevice.xml if you have 0972 or try with this:

[Only registered and activated users can see links. ]

lolypop000, catymag, paramas, dasilvarsa, thank you!
Finally I've succeed, no less than 50 times did same and same with all cures and updates - every time I/it fail and suddenly it get to pre-boot every time, nobody knows why... Now the fight continue...
Thanks once again!

P.S. When it pre-boot - all tools work - Cure 3, the Updater and the set from lolypop000 - just everything

Originally Posted by musketeer

...I've succeed to screenshot it while it is visible to the PC But the updater said that "No updates found for your device" (or similar to that). Is that means that I did not got right firmware? it is 1350 and used the Cure tool I made .RGN from [Only registered and activated users can see links. ]
...

Hi, i have the same problem but mine is a 3790 Series and its detected as 34xx series it still the legend system software missing;i also press the corner near the mic(I think is that area for the pre boot) and sometimes it show system ,system,system for a few seconds ,im not sure if this is preboot mode.
I deleted gupdated.gcd and *.img maps to try 2gb NV backup when unit works fine and then y I screwed it up .Mine is a 1101 device.Realy Tnx