Thread: Nuvi 1390 Reboot Loop Cure Firmware

Try click with right button on mous an click run as administrator on updater.exe

I'm sure it's running as admin, UAC asks me about it and I click "yes".

Please try with right click on updater.exe an run as administrator and report back.
Or try on pc with XP.
Whay on both nuvi write that you have the same FW as installed,on one is FW 3.60 and on another is 3.70?
Try with FW 5.40 that i send you.

I look on youtube video.

Try the following:
1 - download and unzip the archive to the root directory on your PC [Only registered and activated users can see links. ] (0972_510)
2 - open the folder, run the updater.exe, choose a window - the second paragraph of usb-device
3 - turn on nuvi 1390 button POWER, hold your finger top / left corner of the screen, plug in the nuvi usb cable
4 - Start the firmware, click OK, as soon as the process of the firmware (the one in your video) - rhinestones, release your finger from the screen (finger on the screen does not hold).

I apologize for the translation.

i have the same problem, but the link is off line, up again?
thank´s

Doesn't matter if I release the finger or leave it, it does the same thing.

Well, I am more than sure than nothing can be done but ok lets play a little bit ....

Have you tried flashing different region? For example 0x10 the logo?

Have you tried installing firmware from an SD card (GCD)?

Couldn't get anything to work - sent in for warranty replacement. All good now! :p

Are you sure you have the same problem shown on the video above? If it is AFAIK there is no solution for it otherwise read this topic:
[Only registered and activated users can see links. ]