Thread: Nuvi 1300 stuck on garmin splash screen

Thanks, lolypop
i went through process and got nowhere here is what i did:
1. got cure tool from here [Only registered and activated users can see links. ]
2. got GCD file and GCD-MTK file from here [Only registered and activated users can see links. ]
3. started cure , picked newly downloaded files, marked option "CURE" it successfully processed file
4. ran UPDATER, picked USB support, on this step i got GARMIN turned on with left top screen corner pressed, while pressed, GARMIN appeared in UPDATER USB connection tab, once i saw that i pressed OK, UPDATER went through writing (GARMIN showed loading loader) once loaded it gave me an error - see screen shots attached. (GARMIN it self says "SOFTWARE MISSING")

Did i miss something?
Also, Device ID starts with 375... does that make any sense at all? again, see pics attached.

P.S. i have also tried ORIGINAL (i suppose when chosen it just flashes original without modifications)
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
P.P.S. PREBOOT: i cant get any response from GARMIN unit when trying to get to ST0RAGE mode, also am i right, that i actually need that so PC would see my GARMIN unit?
Thanks folks for helping me out, i sincerely appreciate it, still hoping to get it to work.


added: found this and readint it now: [Only registered and activated users can see links. ]
ADDED LATER: some people may wonder about guts and PDF/DATASHEETs so i have found datasheets for bot of my ROM and RAM chips
CPU:
ARM GARMIN ST
590-00045-01
AA045 VQ

ROM:
SANDISK iNAND
SDIN2C2-2G
(spezial.com/commercio/dateien/produktbeitraege/DS_-_iNAND.pdf)

RAM:
SEC K4X51163PG
forum.hjtag.com/attachment.php?aid=499&sid=gtkNHD

Allright, i now have finished reading sticky about SOFTWARE MISSING - do you folks use regular terminal or special one, perhaps custom?
another question - it appears to me that this unit can be flashed with having certain file(s) on SD card - am i right? thanks