Likes: 
I think you must not use the US 3.00 but must use the original one. Have you sved the orginal GUPDATE.GDC that was on the device? if so you can open that in RGN tool and save it to a RGN file and use that to flash.Originally Posted by Torujung
That is what helped me to unbrick it.
But still no luck for me getting to Thai version
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 43
Thread: Garmin can't boot(static at GARMIN Display)after trying to convert to other version firmware
Hybrid View
-
1st March 2011, 12:05 PM #1Member
- Join Date
- Dec 2009
- Location
- Thailand
- Age
- 46
- Posts
- 12
- Rep Power
- 0
-
2nd March 2011, 12:20 PM #2Member
- Join Date
- Dec 2009
- Location
- Thailand
- Age
- 46
- Posts
- 12
- Rep Power
- 0
Wow finally some progress.
I found out that in RGN tool my original 5.00 GDC had first the boot then the fw_all and then the fw1_resources. In the thai version it had a different order. I changed the order and now it flashed correctly. The device started and now has 3.00 software version on it.
I'm about to load the JCV file to test.Last edited by irresisti; 3rd March 2011 at 07:20 AM.
-
2nd March 2011, 01:42 PM #3Member
- Join Date
- Dec 2009
- Location
- Thailand
- Age
- 46
- Posts
- 12
- Rep Power
- 0
Hi,
Ok everyting is working now. Lane assist and JCV
Should I put the original GUPDATE.GPD on the device again? or is this not needed?Last edited by irresisti; 2nd March 2011 at 01:54 PM.
-
2nd March 2011, 04:26 PM #4Member
- Join Date
- Feb 2011
- Location
- Bangkok thailand
- Posts
- 12
- Rep Power
- 0
Hi irresisti Originally Posted by irresisti
Could you please let me know if gps can show thai font or not?
I am still at the point that thai font cannot show in my gps.
-
3rd March 2011, 07:02 AM #5Member
- Join Date
- Dec 2009
- Location
- Thailand
- Age
- 46
- Posts
- 12
- Rep Power
- 0
I have not tryed it yet. I only use the English map, But try this files. Originally Posted by shirobomb
Just put the Keyboards folder under the main dir in your device and the text also in the main dir of your device. and the BIN file must be in .system\ExtData
[Only registered and activated users can see links. ]
-
3rd March 2011, 07:12 AM #6Member
- Join Date
- Dec 2009
- Location
- Thailand
- Age
- 46
- Posts
- 12
- Rep Power
- 0
OK I have tested it all. My device has Thai Keyboard and Thai Menu and Thai Voice. only thai map not tested yet.
I think it must work on your device to. Just put the files I send before on your device, I think the best thing to do after that is Hard Reset. Turn the device of and keep holding the right bottom and power it on. It will then ask you to do a restore. After the restore it will ask you your country again. I chose Thai there and maybe that is what you need to do.
My device is now both Thai and English.Last edited by irresisti; 3rd March 2011 at 07:18 AM.
-
15th March 2011, 03:21 AM #7turbocccGuest
My own gps can show Thai fonts in POIs and I did not do anything special.
Last edited by turboccc; 15th March 2011 at 03:23 AM.
Reply With Quote
Bookmarks