Thread: CityXplorer maps unlocked to work in Nuvis 37xx series

Some weeks back i loaded New York and paris with NO problems on sd card (3790T)
However, the Australian cities ie: Melbourne and others, will not show up on nuvi no matter what i try, incluing running unlock software we use. Has anyone had any issue??
Also to note. Melbourne Navetq has sensis map , i think this is error by uploader.
Thanks

Originally Posted by catymag

interesting is to know if maps this FID above 2200 work with pedestrian and public transports features on 37xx series, can you confirm it?

No they do not work. GMA file is needed.
Modified maps are required from this tread.
I used them.

Maps with FID below 2200 work, but even if unlocked UNL file is needed for public transports. Key must be calculated with PID 2.

=============================

P.S.
Thank you catymag for ALL info on this topic.

Originally Posted by miodrags

No they do not work. GMA file is needed.
Modified maps are required from this tread.
I used them.

Maps with FID below 2200 work, but even if unlocked UNL file is needed for public transports. Key must be calculated with PID 2.


=============================

P.S.
Thank you catymag for ALL info on this topic.

mıodrags

In post one you did not mention that PID should be 2... Do you mean we we need two unlock codes attached bac to back in unl file. one with PID 1 and one with PID 2, or just PID 2 is sufficient for both Pub Transport and enhanced ped mode?

catymag

do you have any idea about this?

THANKS for both

miodrags

Today I put all the files as you said and nuvi 3790 sees all of them. I do not use .unl files but rather unlock the maps with Fast IMG Unlocker 1.4
Now on 16 GB sd micro I have more than 34 maps...

Thanks..

Originally Posted by warblade52

miodrags

Today I put all the files as you said and nuvi 3790 sees all of them. I do not use .unl files but rather unlock the maps with Fast IMG Unlocker 1.4
Now on 16 GB sd micro I have more than 34 maps...

Hi,
How do you manage to use them all at the same time? Do you rename the IMG files to gmapsupp.img when necessary? Or have you joined them all into a single IMG file?

Second, could somebody please explain me once again: is there any use of having say CityXplorer Helsinki, or CityXplorer Oslo when I already have City Navigator Europe? (Caty, I've seen your post, thank you; however, I still do have some questions left but can't post them to where I started them because you've closed the topic; Please tell me if I am doing something wrong and this is against the rules to ask questions like that.)

The reason I am asking is because I've had different experience in routing for pedestrian roaming when using City Navigator Russia and CityXplorer Saint-Petersburg. When using City Navigator NT Russia in Garmin Mobile XT with pedestrian mode enabled I've had routing in Saint-Petersburg completely different to what I had with CityXplorer Saint-Petersburg. The Garmin Mobile XT was providing improper routing on CN Russia resulting in routes that were far away from reality. It seemed like the map simply hasn't had any information about 'pedestrian' object for many of the streets. I switched to CityXplorer and... voila! it resulted in proper short routes that were exactly what I needed. Imagine, some routes have shortened by 100%! Is it because something went wrong with CN Russia and in fact the maps are just identical (providing that I could cut the Saint-Petersburg's map from CN Russia instead of installing the CityXplorer)?

Also, is it correct that CityXplorer provides navigation information that suggests which public transport can be used to get to destination in the city whereas the City Navigator's maps do not provide this info? Say, I've heard that CityXplorer suggests the route where it includes buses, metro and other transport I could take to reach the destination address whereas the City Navigator's map does not provide this info.

Thank you.

Originally Posted by catymag

maps are already unlocked, unl file with PID 800 is needed to have additional features like ped mode and public transports on 37xx series that usually cant be viewed without gma file

Catymag,

OK I will create them, but do we need the same for 3D maps also?

PS Sometimes you dont know how they are unlocked. That why I used FIU to be on the safe side..

Originally Posted by catymag

maps are already unlocked, unl file with PID 800 is needed to have additional features like ped mode and public transports on 37xx series that usually cant be viewed without gma file

Catymag

Is it PID or FID 800, I think you mean FID..

Originally Posted by warblade52

Catymag

Is it PID or FID 800, I think you mean FID..

yes sure, corrected it is FID 800
MMR FID has been modified to 800 to use with JMK as explained in post one-
These maps are unlocked for 37xx series, maps work in these devices that usually cant unlock the whole features without gma-
3D maps in this thread are unlocked

Originally Posted by catymag

yes sure, corrected it is FID 800
MMR FID has been modified to 800 to use with JMK as explained in post one-
These maps are unlocked for 37xx series, maps work in these devices that usually cant unlock the whole features without gma-
3D maps in this thread are unlocked

Catymag'

Thanks.. On the way to home it says that I can switch to Ped mode to use my new Cityxplorer maps.. This means that PID 1 is good for Ped mode, do not know PT though?? My .unl files are for FID 800 and PID 1. Also now it updating the firmware to 3.60.. Big leap from 2.50 to 3.60..