Thailand Streetmap Eng NT+THAI V11.00+JCV+ DEM+ Thailand 3D Building

**burachat** · 24th November 2010, 05:06 AM

Originally Posted by aekhong

See this --> [Only registered and activated users can see links. ]
Rem :: You need Hexeditor.,+ Checksum to make a modified firmware.
remember to use your original boot.bin.(will not brick if you do so), just make a rgn from your current firmware to flash if you get somethings wrong.

Thank you very much , surely help a lot , always want to try the Hex Editor but really don't know how , with this head-start , i'll try it out .

**aekhong** · 24th November 2010, 06:11 AM

Hi burachat .,
It's not too hard. I can give you a mod .gcd but it's better if you can do it by yourself.

**phakboong** · 24th November 2010, 06:32 AM

is this method of firmware mod. to use TTS can be appliy to Nuvi255w+(CHN modified to SG2.8)?
Thank

**aekhong** · 24th November 2010, 06:40 AM

Originally Posted by phakboong

is this method of firmware mod. to use TTS can be appliy to Nuvi255w+(CHN modified to SG2.8)?
Thank

I'm not sure about this because it depend on firmware version suuport or not.
For example., M10 can't use Thai TTS., 7x5 and newer(1xxx., 37xx etc.) can use.,
2x5 is the older one., so just try it.

**burachat** · 24th November 2010, 07:48 AM

Originally Posted by aekhong

Hi burachat .,
It's not too hard. I can give you a mod .gcd but it's better if you can do it by yourself.

Yeah , I think so too , maybe if i really can't do it myself , i'll have to disturb you one more time :D

**kokokoko789** · 24th November 2010, 10:24 AM

supat19ม

Pls. suggest me how to install it to 205W Sg/Mal ?

**phakboong** · 24th November 2010, 10:45 AM

concerning to TSM11JCV , do any one knew the difference between each version , due to they also have 78MB , and 198MB in this thread , just only the sharpness of the pictures?
Thank

**aekhong** · 24th November 2010, 10:58 AM

Originally Posted by phakboong

concerning to TSM11JCV , do any one knew the difference between each version , due to they also have 78MB , and 198MB in this thread , just only the sharpness of the pictures?
Thank

I think so.

But 198MB jcv is for dual map. (Not only for 37xx but 7x5 too !!)
For me it's worth to use 198MB jcv if my unit can use dual map.

**tchaiyuth** · 24th November 2010, 02:18 PM

Originally Posted by aekhong

See this --> [Only registered and activated users can see links. ]
Rem :: You need Hexeditor.,+ Checksum to make a modified firmware.
remember to use your original boot.bin.(will not brick if you do so), just make a rgn from your current firmware to flash if you get somethings wrong.

I don't know how to modify the firmware for 205w sing/mal.. Could you please teach me how to modify it?

Thank you in advance.