wannaboon.,
updater mean updater.exe (not webupdater).
wannaboon.,
updater mean updater.exe (not webupdater).
To apiwatc
After I flashed with the thai firmware the system boot but is stuck at the updating traffic receiver software.
What could be the problem and is there any way to disable the traffic receiver?
even if i bypass the traffic receiver software updating by starting the car engine, the nuvi shutdown when i choose "view map".
in short, 1460 thai fw cannot be used to enable jcv on 1490t...at least not on my unit
wannaboon
What map do you use in Nuvi1490. My Nuvi 1490 TH used Tsm 11.0 TH or EN and gmapbmap 4.00DEM if you use gmapbmap 5.00DEM and Tsm 11.0 DUO it will shutdown when you navigate. Sory I don't test with traffic receiver so Idon't tell you what happen and I want to know when you simulate driving does it can show JCV and Lane assist.
The 006-D2225-00.bin is a Thai font for 1460 TH you will copy it to ExtData folder.
apiwatc
yes i use tsm 11.0 duo.
the problem of traffic receiver updating shows up after i flash the fw to US3.00 and continue when flash to thai3.00, rendering the unit unusable. so i have to flash back to my old fw
maybe our 1490 hardware version is different?
when i choose view map the unit shutdown so i didnt get to the stage of JCV and lane assist....
Wannaboon
Please disable traffic receiver while it updating and Please check your HWId is 972 if it is when you downgrade to 3.00 US [ I think your old FW is 4.60 or 4.70 ] it is complete or not by looking in your Inventory Boot BLK, X-Loder and System is 3.00.then flash again to 3.00 TH by 1490 3.00 US TO 1490 3.00 TH.rgn it will be 1490 3.00 TH and check the inventory again Boot BLK, X-Loder and System must be 3.00. [ The above quick guide is for HWId 972 ]
If used TSM 11.0 DUO map and basemap 5.00 DEM it take Nuvi shutdown. Which my experience sometime I can view map and when navigate it will shutdown in some place when I change to TSM 11.0 TH or EN map 4.00 DEM basemap it not.
Thanks, v 10.1 of this map has served me well and I'm excited to try the update. Downloading...
Question: Is the gmapdem.img compatible with a 765T (US version)? It's not showing up in the map info list.
Last edited by 10drill; 21st December 2010 at 09:45 AM.
10drill
Rename to gmapbmap.img.
10drill
in nuvi 765t it not support gmapdem.img nuvi 765t can install 4 maps in yours gmapprom.img,gmaprom1.img,gmapsupp.img,gmapupp1.img
and 2 maps for 3d is gmap3d.img and gmap3d1.img
you can rename gmapdem.img to one of *.img that not use I suggest to rename to gmapprom or gmapprom1
Nuvi765 doesn't recognize gmapsup1.img or gmapsupp1.img (or gmapupp1.img???).
But gmapoem.img is recognized even not visible in the selection
Bookmarks