Likes: 
The PouchX file 082701000321.rgn is the same combination of firmware as 082701000420.rgn [2x5W boot.bin and 465 fw_all.bin, w/o the logo of course] but contains earlier versions of firmware modified by PouchX. It's known to work, it's very safe and it's a little smaller than the later firmware version combo which may help with the loading.
You would still need to flash the 465 logo to enable TTS i think, unless your 205W has previously been flashed with the senior 2x5W logo to enable TTS. That can be done later anyway if needed, so baby steps ... try either of the files without the logo.bin initially.
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 25
Hybrid View
-
25th April 2015, 12:00 PM #1Garmin/GPS Systems GMod.
- Join Date
- Aug 2011
- Location
- Oz.
- Posts
- 6,571
- Rep Power
- 2534
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
-
25th April 2015, 10:20 PM #2Member
- Join Date
- Apr 2015
- Location
- london
- Age
- 50
- Posts
- 11
- Rep Power
- 0
Finally it worked!!!!!PouchX file worked. It upgraded the software and the Updater said upgrade succeeded. I am yet to take it on a ride after the upgrade to see the lane assist. Is their anywhere in the hidden menus to see the firmware has been flashed?
Originally Posted by Neil
I also did the TTS upgrade using the post you mentioned - [Only registered and activated users can see links. ]
Just did a simulated drive in the GPS unit. Didn't announce the street names. Does TTS not work in sumlation mode or any setting needs to be enabled somewhere?
Reply With Quote
Bookmarks