Thread: nuvi 1310 - does not start up, frozen Garmin symbol on screen

Originally Posted by lolypop000

You can try with this:

[Only registered and activated users can see links. ]

Download to PC and unpack.

Go to preboot and run updater.exe in folder Updater

When updater.exe window open click on USB in this window and click OK

When updater.exe window open click on USB in this window and click OK[/QUOTE]

Was able to update the software. After the update the lcd went black and garmin logo came up again.
Switched nuvi off and on again, but still does not load the software, only garmin logo shows. So same problem as before exists.
Also tried suggestion from voyager in #13 and did reinstall same software.

Any other suggestion?

Originally Posted by Rihana1

Was able to update the software. After the update the lcd went black and garmin logo came up again.
Switched nuvi off and on again, but still does not load the software, only garmin logo shows. So same problem as before exists.
Also tried suggestion from voyager in #13 and did reinstall same software.
Any other suggestion?

Did you try connect your Nuvi to PC after flashing cure firmware. Is it recognized by PC?
The main thing in flashing cure firmware is that Nuvi is visible by PC and you can delete gupdate.gcd and damaged files. For example map files.

Originally Posted by voyager56

Did you try connect your Nuvi to PC after flashing cure firmware. Is it recognized by PC?
The main thing in flashing cure firmware is that Nuvi is visible by PC and you can delete gupdate.gcd and damaged files. For example map files.

When connecting the nuvi to pc it is still not visible. If I go to pre-boot mode it is visible for 4-5 seconds and then gone again.