Garmin Topo Australia & New Zealand up to V3.01

enderbee · 28th September 2011, 12:05 PM

excellent stuff
using the tools provided and the tutorials i have successfully copied the sd card that i purchased for my 62s onto another card (sandisk 4g) to use in my nuvi 3760

tools used- img unlocker and unlock generator

thanks again

**Cristian Trisca** · 16th January 2012, 02:37 PM

Hi guys

I successfully installed topo maps for Australia on a Garmin Asus A50, works great, only problem is, the contour lines are in ft not metric, and the settings under Units are set to m/km.

I think the *.img file I downloaded must have been created with the units set in ft.

Any ideas on how I can change this?

**catymag** · 16th January 2012, 02:43 PM

Originally Posted by Cristian Trisca

Hi guys

I successfully installed topo maps for Australia on a Garmin Asus A50, works great, only problem is, the contour lines are in ft not metric, and the settings under Units are set to m/km.

I think the *.img file I downloaded must have been created with the units set in ft.

Any ideas on how I can change this?

Moved to the right thread-
you can try the solution in this thread
[Only registered and activated users can see links. ]

**catymag** · 10th February 2012, 12:02 AM

you can use torrent, than use
[Only registered and activated users can see links. ]
to unlock
file attached

**calcatoupas** · 14th February 2012, 08:44 AM

Hello:
I tried to unlock the map like other IMG file maps (with Jet Mouse), but it doesn't work. Normally I use Gmaptool to charge the map to Basecamp, and then I use Jet Mouse to unlock, and after that I put the map in the device. Now the map doesn't charge correctly in Basecamp. What must I do with the UNL arvhive?
Thank you

**Neil** · 14th February 2012, 10:06 AM

@calcatoupas
Reading the thread, even just reading catymag's post immediately above yours, would tell you that you must use [Only registered and activated users can see links. ] on this map

**calcatoupas** · 14th February 2012, 05:06 PM

Oh ¡¡ Excuse me, I'm fool. I didn't read correctly the instruccions.
Thanks

SCHYLTZ · 29th February 2012, 11:49 PM

Hi been around looking for some time and thought it seems like a very helpful site to be apart of. I came accross this thread about topo V3 and Iam wondering how to set all this up on the PC and on the 1350. Sorry but age is on the wrong side of me so be kind.

**Neil** · 1st March 2012, 12:31 AM

G'day ol' timer (i'm probably older, so i shouldn't use that term)

Start here: [Only registered and activated users can see links. ].
Lots of info here too: [Only registered and activated users can see links. ].
You can load the *img file back into [Only registered and activated users can see links. ] with [Only registered and activated users can see links. ] to see it on your PC. The *img can be put directly into either the unit or sd's Map folder (create it if not there) named anything convenient eg 'wotevayawant.img'. Best to use the sd for maps unlocked with [Only registered and activated users can see links. ].
Welcome to Noeman.
Edit: Sorry, forgot this is a Topo thread, it's bigger than can fit on the nuvi, so you may as well leave the image named as gmapsupp.img and put in the Garmin folder of an sd of minimun size 4GB.