CityXplorer maps unlocked to work in Nuvis 37xx series

**miodrags** · 6th December 2010,Â 06:49 PM

Originally Posted by warblade52

miodrags

I also put them in map folder.. But so many maps interesting.. I will try tomorrow. A question? Do you think 3d maps can be added also like this? That I have to try also..

Yes, you can add 3D maps like I mention. Look at the beginning of the list:

Australia.img
Australia_3D.img
NorthAmerica_2011_30_3D.img
NorthAmerica_2011_30.img

I'm not sure if they got to have same name as the leading map, but it is easier to organize maps when you add 3D at the end.

**warblade52** · 7th December 2010,Â 02:47 PM

miodrags

Today I put all the files as you said and nuvi 3790 sees all of them. I do not use .unl files but rather unlock the maps with Fast IMG Unlocker 1.4
Now on 16 GB sd micro I have more than 34 maps...

Thanks..

**catymag** · 7th December 2010,Â 03:06 PM

maps are already unlocked, unl file with FID 800 is needed to have additional features like ped mode and public transports on 37xx series that usually cant be viewed without gma file

**warblade52** · 7th December 2010,Â 04:01 PM

Originally Posted by catymag

maps are already unlocked, unl file with PID 800 is needed to have additional features like ped mode and public transports on 37xx series that usually cant be viewed without gma file

Catymag,

OK I will create them, but do we need the same for 3D maps also?

PS Sometimes you dont know how they are unlocked. That why I used FIU to be on the safe side..

**warblade52** · 7th December 2010,Â 04:32 PM

Originally Posted by miodrags

No they do not work. GMA file is needed.
Modified maps are required from this tread.
I used them.

Maps with FID below 2200 work, but even if unlocked UNL file is needed for public transports. Key must be calculated with PID 2.

=============================

P.S.
Thank you catymag for ALL info on this topic.

mÄ±odrags

In post one you did not mention that PID should be 2... Do you mean we we need two unlock codes attached bac to back in unl file. one with PID 1 and one with PID 2, or just PID 2 is sufficient for both Pub Transport and enhanced ped mode?

catymag

do you have any idea about this?

THANKS for both

**warblade52** · 7th December 2010,Â 04:37 PM

Originally Posted by catymag

maps are already unlocked, unl file with PID 800 is needed to have additional features like ped mode and public transports on 37xx series that usually cant be viewed without gma file

Catymag

Is it PID or FID 800, I think you mean FID..

**catymag** · 7th December 2010,Â 04:48 PM

Originally Posted by warblade52

Catymag

Is it PID or FID 800, I think you mean FID..

yes sure, corrected it is FID 800
MMR FID has been modified to 800 to use with JMK as explained in post one-
These maps are unlocked for 37xx series, maps work in these devices that usually cant unlock the whole features without gma-
3D maps in this thread are unlocked

**warblade52** · 7th December 2010,Â 05:57 PM

Originally Posted by catymag

yes sure, corrected it is FID 800
MMR FID has been modified to 800 to use with JMK as explained in post one-
These maps are unlocked for 37xx series, maps work in these devices that usually cant unlock the whole features without gma-
3D maps in this thread are unlocked

Catymag'

Thanks.. On the way to home it says that I can switch to Ped mode to use my new Cityxplorer maps.. This means that PID 1 is good for Ped mode, do not know PT though?? My .unl files are for FID 800 and PID 1. Also now it updating the firmware to 3.60.. Big leap from 2.50 to 3.60..

**catymag** · 7th December 2010,Â 06:37 PM

PID 1 is the default value of PID - It means it's useless to add it.
If you see ped mode(EPM) you should have pub transports enabled
read
[Only registered and activated users can see links. ] post 13 and my post n18