Thread: FAQ iGO (Put maps in iGO )

put maps in Primo
Primo/content/map

Spoiler: +

[Only registered and activated users can see links. ]

Spoiler: In detail

CONTENT
building:
*.3DL - 3D landmark buildings
*.3DC - conventional three-dimensional building
car:
*car - cursors and cars.
dem:
*.DEM - three-dimensional landscapes
global_cfg:
*.global_cfg.zip - features of DD rules in different countries, road signs, information about TMS stations
histspeed:
*.HSP - Navteq Traffic Patterns - averaged data of road load on different days of the week and hours, helps in calculating the route to avoid traffic jams. Here you can read the description of the function HistSpeed. To date, the files are irrelevant, since they have been replaced by .FSP
lang:
*Lang_.zip, are responsible for the interface language
map:
*.HNR - for quick calculation of long routes, only for Primo, to activate, there must be an entire set of cards of the same version EEU (Eastern Europe), WEU (Western Europe), or additional entry in sys.txt
** Easy - easy route, Economical - economical, Fast - quick, Green - eco-friendly, Short - short.
*.FJW - this is new ( 2014 year) vector version of "crossroads view"..
*.FBL - map.
*.FDA - Driver alerts (driver warnings).
*.FPA - Point Addressing (additional information on addresses). Only for Primo
*.FSP - traffic profiles, the content is displayed in the road data archive and is taken into account by the program when planning a route
*.FTR - Truck Info (information for freight transport). Only for Primo
*.FDS - files automatically control the operation of the transmission in some models of modern cars on dangerous curves and sharp turns. No for ordinary GPS-devices
THESE FILES ARE NOT NEEDED*.fbl+*.fpa+*.fda+*.fsp+*.ftr+*.hnr - must be of the same version and the same manufacturer, otherwise, even with a license *.fda *.fpa *.ftr *.fsp *.hnr (any) will be inactive content.
phoneme:
*.PH - phonemes for TTS - correct pronunciation of the names of streets and settlements, phonemes for Russian voices are not recommended.
poi:
*.POI - points of interest are standart and extended
raster:
raster (satellite) map files
scheme:
*.zip (optional), color schemes are responsible for the map palette
skin:
*.zip (Not required), to register and modify the interface allows you to obtain additional features and capabilities
speedcam:
*.SPC - Releases of files of official speedcam databases
*.TXT - Unofficial database files of speedcams and alert points
tmc:
*.TMC - .tmc files are responsible for information about the stations "Traffic Message Channel" These files are only needed for RDS.
userdata:
*.usericon - icon files (optional) for additional points of interest
*.KML - personal points of interest imported from Google Maps or Google Earth
Voice:
*Voice_.zip, voice guidance
VR:
*VR - voice control files, commands
Vr_vde:
*Vr_vde - voice control files, address input

License - files * .lic, * .lyc - licenses, there must be a minimum and sufficient number
SAVE - created by the program at the first start, it stores the settings (after setting up the program,
it is advisable to make a backup) files user.upoi (favorites), history.sav (history), etc.
UTILITY - files from the kit for skins or branding
UX - *.zip ux- utilities
VOCON - voice control files
branding.zip - images, icons, codes, sound files, etc.
data.zip - standard, original interface and program data.
sys -fine-tuning the program
tts_nua_v5 - required when using TTS audio prompts
ui_igo9 - images, icons, codes, etc.
audio - files for sound accompaniment of events

vautov5.dll - required when using TTS audio prompts
vocon3200_asr.dll - for voice control
vocon3200_base.dll - for voice control
vocon3200_platform.dll - for voice control

put maps in NextGen
Igo_xxx/content/map

Spoiler: +

[Only registered and activated users can see links. ]

Spoiler: In detail

building:
*.3DL - 3D landmark buildings
*.3DC - conventional three-dimensional building
car:
*car - cursors and cars.
dem:
*.DEM - three-dimensional landscapes
histspeed:
*.HSP - Navteq Traffic Patterns - averaged data of road load on different days of the week and hours, helps in calculating the route to avoid traffic jams. Here you can read the description of the function HistSpeed. To date, the files are irrelevant, since they have been replaced by .FSP
phoneme:
*.PH - phonemes for TTS - correct pronunciation of the names of streets and settlements, phonemes for Russian voices are not recommended.
map:
*.HNR - for quick calculation of long routes, only for Primo, to activate, there must be an entire set of cards of the same version EEU (Eastern Europe), WEU (Western Europe), or additional entry in sys.txt
** Easy - easy route, Economical - economical, Fast - quick, Green - eco-friendly, Short - short.
*.FJW - this is new ( 2014 year) vector version of "crossroads view"..
*.FBL - map.
*.FDA - Driver alerts (driver warnings).
*.FPA - Point Addressing (additional information on addresses). Only for Primo
*.FSP - traffic profiles, the content is displayed in the road data archive and is taken into account by the program when planning a route
*.FTR - Truck Info (information for freight transport). Only for Primo
*.FDS - files automatically control the operation of the transmission in some models of modern cars on dangerous curves and sharp turns. No for ordinary GPS-devices
THESE FILES ARE NOT NEEDED*.fbl+*.fpa+*.fda+*.fsp+*.ftr+*.hnr - must be of the same version and the same manufacturer, otherwise, even with a license *.fda *.fpa *.ftr *.fsp *.hnr (any) will be inactive content.
tmc:
*.TMC - .tmc files are responsible for information about the stations "Traffic Message Channel" These files are only needed for RDS.
speedcam:
*.SPC - Releases of files of official speedcam databases
*.TXT - Unofficial database files of speedcams and alert points
poi:
*.POI - points of interest are standart and extended
*.KML - personal points of interest imported from Google Maps or Google Earth

put maps in Luna
Igo_Luna/content/mg/baseline/

Spoiler: +

[Only registered and activated users can see links. ]

Spoiler: in detail

mg/baseline:
*.GRN - multivolume files of country maps.
*.GS3 - map components Speed ​​Limit.
*.GS5 - map components Speed ​​Limit.
*.GLT - topography
*.GLC - 3D building models
*.GPA - address points
*.GTL - traffic lights
*.GPH - phonemes
*.GPB - POI
*.GWS - signs
*.GTP - traffic profiles
*.GJW - transport interchanges, sidewalks, primers
*.GLS - rivers, lakes, parks
*.GLR - roads
*.GLL - 3D-Attraction
*.GOB - One-Box Search, address search in "one line"
*.GEP - extended postal code
*.GPR - pre-rendered road networks
*.GLZ - Luna built-in
*.GAP - NetAlertPoint
*.GTA - truck attributes
content/!viscontent/models:
*car - cursors and cars.
*pillars - pillars, supports (?).
*planes - airplanes.
*satelite - satellites.
*tombstones - monuments.
*trees - trees.
content/dem:
*.DEM - three-dimensional landscapes
content/global_cfg:
*.ZIP - 3 configuration file with the characteristics of settings and rules by country.
content/lang:
*.ZIP - language localization files (compatible with previous versions of Nextgen)
content/speedcam:
*.SPC - Releases of files of official speedcam databases
*.TXT - Unofficial database files of speedcams and alert points
content/userdata/poi:
*.KML - personal points of interest imported from Google Maps or Google Earts
content/voice:
*.ZIP - voice localization files (compatible with previous versions of Nextgen)
content/vr and vr_vde:
voice control files by language