Thread: "Red" phenomenon [ iGO PAL]

?? many colors of a street in a route are specified depending on the event in the color.ini of a scheme - basically in the data.zip. Could it have something to do with it ??

I had observed this (red sections) at LUNA at the beginning and when the TMC profile had not yet established a connection to the server. LUNA only has schema in data.zip

ok! one for day, one for night; satisfied now !?? but at a given time it always remains only one

Addition: I didn�t want to discuss tides, I wanted to suggest a possible source of the problem

E.O.D.

Hi @jorgeultra

Thanks for your advice. I am aware of all your insights and I also agree with most of your comments, as they are already familiar to us and as we have already had the opportunity to discuss them between us in the forum.

As for the saying that "As until today no user other than you has reported a similar situation", it could be also and easly said that "As until today, no user other than me, has raised this RED issue".
At the same time, not every phenomenon should be related and be suspected with incorrect installation of Pongo, and certainly or especially, not after @Texas raises his explanation: "This red I have too and pretty much everybody". Why? Because and after all, we'll not suspect @T that he did not install Pongo well.

Despite this & Besides that

Despite all this, the "RED phenomenon" popped up suddenly only a few weeks ago, for no understandable reason. Everything was fine before.
I had a suspicious reason of my own and relevant to a timeline, that maybe it has something to do with the TMC and following the huge traffic jams that happened immediately upon opening the "Big corona closure" we had and since then, as if in two places (road sections), the phenomenon has fixed like a bug and not fixing itself later/so far.

Besides that, my PAL works perfect and smoothly so, let it be.

Thank you so much for all you have troubled and bothered with this thread.

Do next
- disable phone online data
- clean the cache (and rename save folder). Ok, you need to go through the setup again, but ...
- try it and see if there are any red lines now

??? just a consideration:
There are 2 options in the Pongo Skin -> Traffic Settings
[x] Use real-time traffic data
[x] Use past traffic data

?? if the last option is activated and there are no * .fsp files in the content, then such "discoloration" may occur ??

** Sections may also be drawn in red if [x] Show free traffic flow is activated