International TTS Pro Voices Nuance(ve) v.9.130 for NextGen Basarsoft 9.18.27.627562 Android

zervdim · 11th April 2016, 06:04 AM

American TTS Pro v.9.130 with voices of : Allison, Ava, Tom, Samantha
add in first post.

**~~SOYEL1~~** · 11th April 2016, 10:42 AM

Hello Sir,
Thank you for the addition. Have a little problem with some voices. Some voices don't read testsound message. Only Allison does. (I shortened the message because it wasn't clear, but wasn't reading it before). Please, check the video.
[Only registered and activated users can see links. ]

zervdim · 11th April 2016, 01:28 PM

Originally Posted by SOYEL1

Hello Sir,
Thank you for the addition. Have a little problem with some voices. Some voices don't read testsound message. Only Allison does. (I shortened the message because it wasn't clear, but wasn't reading it before). Please, check the video.
[Only registered and activated users can see links. ]

Hello Sir, Give a look here

I think that you have some strange entry in sys.txt and that cause your problem!!!!
My sys.txt is clear, and in sound section have inside only what I have posted in download files....

**~~SOYEL1~~** · 11th April 2016, 01:43 PM

For some reason, mine doesn't work well. Will try tweaking it a bit...Thnx

**MMARQUES** · 11th April 2016, 11:43 AM

Originally Posted by zervdim

International TTS Pro Voices Nuance(ve) v.9.130

Hi Zervdim,

First of all, my thanks for your post
I have also a problem with the English package voices. I can activate in the menu all the TTS PRO SETTINGS
I have installed the english voices Nuance (daniel, Kate, Oliver) and I have also added to my sys.txt the extra lines you have requested to include in our sys in order to hear the speed cam announcements. I still could not test the TTS voices with the speed cams announcements, but while driving this morning, when you approach an exit where you are suppose to get off, the voice dialogue is not complete, it's cut

As an example, the voice will say "Turn right in....." It does not mention, as an example "turn right in 50 meters". I could clearly hear that some part of the dialogues was missing.
Since I am quite new at the Forum, I would like to share my experience and ask for your support, maybe some other members have experienced the same problem???
I am not using any skins, I am using the nextgen Basarsoft 9.18.27.627562 as indicated in the initial thread.
Thank you in advance for all the support you may give

Kind Regards

**De5i** · 11th April 2016, 12:19 PM

Originally Posted by MMARQUES

Hi Zervdim,

First of all, my thanks for your post
I have also a problem with the English package voices. I can activate in the menu all the TTS PRO SETTINGS
I have installed the english voices Nuance (daniel, Kate, Oliver) and I have also added to my sys.txt the extra lines you have requested to include in our sys order to hear the speed cam announcements. I still could not text the TTS voices with the speed cams announcements, but while driving this morning, when you approach an exit where you are suppose to get off, the voice dialogue is not complete, it's cut

As an example, the voice will say "Turn right in....." It does not mention, as an example "turn right in 50 meters". I could clearly hear that some part of the dialogues was missing.
Since I am quite new at the Forum, I would like to share my experience and ask for your support, maybe some other members have experienced the same problem???
I am not using any skins, I am using the nextgen Basarsoft 9.18.27.627562 as indicated in the initial thread.
Thank you in advance for all the support you may give

Kind Regards

I also use the English pack and TTS voices are not working correctly the spoken voice is being cut half way. For example from the TTS Pro menu if I click on the "Read Out Tunnel Length" to test the voice all I get is "the t...."

On WinCE this works correctly and says the following for the same option "The tunnel length is 0.9 miles"

I am also not using any skin just the default skin with nextgen Basarsoft 9.18.27.627562 plus with all the settings in the sys.txt

zervdim · 11th April 2016, 01:53 PM

Originally Posted by De5i

I also use the English pack and TTS voices are not working correctly the spoken voice is being cut half way. For example from the TTS Pro menu if I click on the "Read Out Tunnel Length" to test the voice all I get is "the t...."

On WinCE this works correctly and says the following for the same option "The tunnel length is 0.9 miles"

I am also not using any skin just the default skin with nextgen Basarsoft 9.18.27.627562 plus with all the settings in the sys.txt

Something in sys.txt cut off, your voice, I think....
If you see video above there is a cut-off in voice, I can hear it, but that happened because voice stop navigate to hear for example Spead limit increasing...
Note, that this engine comes from wince, it is original one, but soon I will refrese thread.....

**MMARQUES** · 11th April 2016, 02:22 PM

Originally Posted by zervdim

Something in sys.txt cut off, your voice, I think....
If you see video above there is a cut-off in voice, I can hear it, but that happened because voice stop navigate to hear for example Spead limit increasing...
Note, that this engine comes from wince, it is original one, but soon I will refrese thread.....

Hi Zervdim

Thank you for your time and for replying to my post

I have revised my sys.txt that I have and in the [sound] entries, it's exactly how you have posted.
I can give you further examples of what is happening in terms of the voice being cut. For example statements such as "After...." and "Prepare to turn right aft...." and also "drive...." are cut. What I can say is every time that the program has to indicate distances, he won't do it. Usually you hear "After 300 meters, turn right" and "Prepare to turn right after 300 meters" and also "Drive for 2 quilometers". Those indications are not given.
I don't know if it helps or if it's more or confusing the issues I am experiencing with the english voice package
Thank you

Kind regards

zervdim · 11th April 2016, 02:35 PM

LOL....
you made all this tests and found all this bugs in 10 min???

Probably, your old TTS voice works fine, so use this one.
Please, don't use this voice, use your old voice......SORRY.

Soon I will post a real trip in youtube, to see that all works.

zervdim · 11th April 2016, 01:42 PM

Originally Posted by MMARQUES

Hi Zervdim,

I have also a problem with the English package voices. I can activate in the menu all the TTS PRO SETTINGS
I have installed the english voices Nuance (daniel, Kate, Oliver) and I have also added to my sys.txt the extra lines you have requested to include in our sys in order to hear the speed cam announcements. I still could not test the TTS voices with the speed cams announcements, but while driving this morning, when you approach an exit where you are suppose to get off, the voice dialogue is not complete, it's cut

As an example, the voice will say "Turn right in....." It does not mention, as an example "turn right in 50 meters".

If you see video then in time 5.25 car is going to turn and the announcment has being in 30 m before turn!
So, in this case you can find exit!

I will see it again in road and post soon....

You can use another TTS or Simple Voice....

BTW, English TTS Engine comes from Original Nuance and the type of engine is dri-40!

I will post another engine soon....