Garmin USB Drivers ?
Does the Nuvi work ?
Can You Navigate with it ?
If you can navigate with this Nuvi it could well be a hardware problem !
Broken Data pin on USB Plug or Dead USB Chip on Mainboard.
Hello guys I just got this Garmin Nuvi 1370 from a friend,tried to update the Map and firmware but got the problem.PC does not recognize the device at all.Tried 3 different cables and 3 laptop and PC running Windows Vista,7,8.1 got the same result:only detected as removable drive and not able to browse inside.The navigator was reseted to to factory defaults,installed a SD card with the MAP and it worked with it,but computer did not browse inside any of removable drives,even in the external SD card.
Any help is kindly appreciate it.
Last edited by Neil; 24th December 2013 at 11:24 AM. Reason: fixed image to display.
Garmin USB Drivers ?
Does the Nuvi work ?
Can You Navigate with it ?
If you can navigate with this Nuvi it could well be a hardware problem !
Broken Data pin on USB Plug or Dead USB Chip on Mainboard.
The difference between stupidity and genius is that genius has its limits.
Albert Einstein.
Use garmin cure tool and your PC will se device
Create backup of internal memory and then format your nuvi.
After this add your backup back to your unit but don't add this: .img, text, keyboard, voice
Run webupdater to download this missing item and then download gmapbmap.img ( basemap ) and you be ready to go
Hello,
yes you can navigate with the garmin nuvi with no problem.USB plug looked good no debris or broken parts inside.Latest Garmin drivers were installed,the computers work fine with my nivi 3490 and 2455 but not with this one.
@ceco134
- Hold 10sec battery icone
- go to second page and click Start Test
- click on button More and look in first row what boot blk number do you have in inventory page
p.s.
If you connect nuvi to car charger your nuvi charging?
Read thread from Caty post.
Hello,
the nuvi charged when you plugged to the car charger.
Boot BLK : B0972-00 5.80 Nuvi Boot block software Pass
Passes almost everything beside the last rows:
UKCyclopsSample.gpi
BeluxCvcyclopsSample.gpi
etc when I got an Error
When you plugged to the cable in the same time you`re in the testing mode screen you can see:
I Limit USB 1A
USB device USB type-B
USB ID volts 2.25V
I Dont know if that helps somehow....
Some infos are needed to help you ,or will have a never ending thread, read the thread I linked above and give these replies please
sent with my phone
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
You have wrong cable.
You must have this when attach cable:
I Limit USB 500mA
USB device USB type-B
USB ID volts 2.25V
When you find cable that will show 500mA then your Pc will see your nuvi in mass storage.
p.s.
If you have external SD card reader, you can use this cable to connect nuvi to Pc.
That is it...
It shows 500ma now,but device is recognized by webupdater only in test mode,cable plugged in.In normal mode still removable.web updater can see the unit but can not update it....
Bookmarks