Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 48

Hybrid View

  1. #1
    VIP Master Navcore v9.541 SE for One/XL 32MB by Tonyzeta
    Navcore v9.541 SE for One/XL 32MB by TonyzetaNavcore v9.541 SE for One/XL 32MB by Tonyzeta

    Join Date
    Oct 2015
    Location
    Home
    Posts
    137
    Rep Power
    186

    Default

    Possible the internal storage of your device is damaged or broken.

  2.    Advertissements


  3. #2
    Junior Member
    Join Date
    Jul 2019
    Location
    Poole,Dorset
    Posts
    1
    Rep Power
    0

    Default

    I have updated my TT ONE 2nd edition with the new bootloader 5.5120 and navcore 9.541TZ, and the
    United_Kingdom_and_Republic_of_Ireland_1030_9519 map.

    Thanks to this thread it all went very smoothly(except for the above glitch)...so thank you so much everyone. Its nice to keep the old TT ONE running for a little bit longer.

    I have yet to try the TT out for real, so I dont know if it has fixed the GPS Week Number Rollover problem that my satnav was having. (Would lose the signal occasionally and sometimes had big problems locking on to the satellites).

    However I did try it outside for a few mins and the time did look to still have a problem still. I will try it out over the next week. I am not to too bothered about the incorrect arrival time, but would like the satnav to work better with the satellites then it did.
    Thanks again.

    A further update. Because the above did not fix the time problem, I checked the GPS chipset for my device. I had read that it used the SirfStar III GPS chipset. However today I discovered (by holding down the on button whilst turning on) that my satnav uses the GL1 chipset.

    So I then used the ttconv download in the thread "WNRO GL1 Clock Error/Sat Fixes Workaround" and my TT ONE now displays the correct time and I think is latching onto satellites much quicker. I think that I have got there in then end thanks to all your help.
    Last edited by philpABCD; 21st July 2019 at 10:04 PM.

  4. #3
    Junior Member
    Join Date
    Oct 2019
    Location
    south wales
    Posts
    3
    Rep Power
    0

    Default

    Hi mate, I have been given my fathers old tom tom one 3rd edition 512MB and it is ancient with a map over 10yrs old, so looking at getting it more up to date, I am guessing I need this newer navcore and a newer uk map installed, if I download this navcore, how do I get it installed onto the sat nav? Do I just delete all the current contents, then copy all the files from this navcore onto the units internal memory using my pc? then run the fast activate program and then boot the unit up? Sorry for so many questions, but I am totally new to all this, and it looks like you have had success doing this, any help or advice would be much appreciated, thanks.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •