Thread: New Navcore 9.430 GO X20 X30 X40 X50 XL IQ Routes XL Live Xl IQ Routes² XXL Start²Start X Easy

Have not tested with the 9.401 much as the 9.430 is current and with that I have working TMC.
But that is not a problem of the NC - the X10 uses a docking port and that is not supported, causing the TMC to malfunction.
Best option for TMC on a X10 TT is to use an older NC

Thanks, might try your 9.401. If it turns out a nono I'll stick with your 9.430 and traffic prog on car radio.

No RDS/TMC in 9.401.

Originally Posted by Hamish33

Thanks, might try your 9.401. If it turns out a nono I'll stick with your 9.430 and traffic prog on car radio.

No RDS/TMC in 9.401.

Reloaded 9.430, didn't change to x40 (24) mode and got RDS/TMC sidebar and connection. Very slow redrawing map (over 100 yards behind actual location. In x40 it's on the button. I'll forget about RDS/TMC. May try 9.160, does it have 'Turn off voice guidance'?
surpried not have a cooment re RDS/TMC active in "self" mode

Just done "Navigate to" address and number in Swindon (UK). Route calculated was to a town near Frankfurt, DE.
Go910, 9.430.890926.1 (from 9.430 for GO models, page 1, post #3), b/l 5.5229, map W&CE 885-4009. "navigate to point on map" worked. What is so odd about Swindon?

As I expected; not a navcore problem. Loaded and switched to 2GB Europe 885-4008 and Swindon is where it really is, not near Frankfurt and I can navigate to an address or post code.

Post copied to the "Maps" forum.

Originally Posted by Hamish33

What is so odd about Swindon?

You don't REALLY want me to tell you do you?

Originally Posted by Hamish33

Just got back from there; judging by the amount of rain the whole town will be floating down the K&A to the sea.

....or towards Frankfurt more likely!!