Automatic Navcore Installations

**~~P33dro~~** · 27th April 2011, 06:01 AM

Originally Posted by singhrh

P33dro:
Thanks for helping a NOOB out. I have some maps of USA/Canada (that are about 1.46GB in size) and in your instructions you say to copy over the map files to the device. What files need to be copied and to where? I have ONE XL with only 1GB internal memory. I Have installed a 1GB SD card in the slot but do not know how to get the device to register this additional memory. Sorry if I am posting this in the wrong forum. If I am could you point me in the right direction.
Thanks

copy ALL from internal memory to safe place...
if you use sd-card tomtom use it as default memory ,so you must copy both in it, navcore and map.

first get your device info from here:
[Only registered and activated users can see links. ]

gitan · 29th April 2011, 07:45 AM

does anyone know what Navcore is right for TomTomRider2?
I suppose Navcore 8.544.1838 - 32MB ..........
thx

**~~P33dro~~** · 29th April 2011, 07:49 AM

Originally Posted by gitan

does anyone know what Navcore is right for TomTomRider2?
I suppose Navcore 8.544.1838 - 32MB ..........
thx

Your device not brick if you test... so make backup your original installation... and make test several navcores then you know

8.544.1838 - 32MB is good choice for starting...

SE Navcore 9.205.547817 is good choice for end...

**lapsus** · 3rd May 2011, 10:32 PM

P33dro Hello, I have an old Go 300, configured as follows.
In your expert opinion I can improve the configuration
thanks in advance

[TomTomGo300] about 7 MB free RAM in use

DeviceName=TomTom by Lapsus
DeviceVersionHW=GO 300
RamDiskVersion=20090707
BootLoaderVersion=55229
LinuxVersion=311596
ApplicationVersionVersionNumber=8417
ApplicationVersion=1255
UserLanguage=Italiano
UserName=
LastConnectionTime=Never
GPSFirmwareVersion=2.4.13.03-XIAC2.0.2-C3PROD1.0
CurrentMap=Italia v865.3245
CurrentMapVersion=865.3245

**~~P33dro~~** · 4th May 2011, 05:33 AM

Originally Posted by lapsus

P33dro Hello, I have an old Go 300, configured as follows.
In your expert opinion I can improve the configuration
thanks in advance

[TomTomGo300] about 7 MB free RAM in use

DeviceName=TomTom by Lapsus
DeviceVersionHW=GO 300
RamDiskVersion=20090707
BootLoaderVersion=55229
LinuxVersion=311596
ApplicationVersionVersionNumber=8417
ApplicationVersion=1255
UserLanguage=Italiano
UserName=
LastConnectionTime=Never
GPSFirmwareVersion=2.4.13.03-XIAC2.0.2-C3PROD1.0
CurrentMap=Italia v865.3245
CurrentMapVersion=865.3245

you navcore is fine,no any reason to update now...

**oldfogy** · 18th May 2011, 02:19 AM

Just a quick note to say thanks for the links, downloads and advice.

(I did post earlier, but for some reason it has not shown)

********************

Edit:
Probably because I posted in a different thread

Oops

**jorgedanielnet** · 28th May 2011, 05:26 PM

It´s possible to put a recent version on Wince 5.0 with an emulator?

**alb1981** · 4th June 2011, 08:13 PM

Which Navcore does work with ttm 140s?
Please advice, thanks
Al

myron2099 · 6th June 2011, 11:26 AM

Navcore 8.544.1838 work on tomtom one 3rd italy

thx

if I install version 9 What happens ?

**SledgeHammer** · 6th June 2011, 04:28 PM

Hi,....

Excellent Post!

Really new at this, but I was able to install "SE Navcore 9.205.547817" on my Go 630 (SD Card) and is working like a champ!
It's like a new GPS, wow I'm so happy!

Thanks Again!

Thread: Automatic Navcore Installations

Thread Tools

Display

Hybrid View

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions