Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32
  1. #21
    Kanopus
    Guest

    Default

    Quote Originally Posted by Neil View Post
    Thanks, I was aware of expert mode in GPSdaemon and had looked at it some time ago. Unfortunately none of it made sense to me then and not more now when i revisited it.
    It doesn't look complicated. Use "Port" - "Open" then "Region Dump" - set number - "Start".

    Spoiler: screenshot
    BI0MJP6

  2.    Advertissements


  3. #22
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    Yes, thanks Kanopus. I'd finally figured it out myself [eventually] that there are actually 2 advanced modes, 'Expert' and 'Full' [gpsdaemon -full]. The 'Expert Mode' gives this screen which doesn't have the 'Region Dump' option in Garmin Interface tab:

    [Only registered and activated users can see links. ]

    As shown above, I'd previously been trying to dump regions according to the following guide by juergenss. Thanks to Caty for the link. Caty also suggested i write a tut for dumping if i could get it working, but Kanopus has done that above in his trademark efficient way so i've made what's more a series of observations and comments. Much of which may-well be known to the old hands i'm sure.

    [Corrected Bing English transaction from Deutsche, this is based on eTrex HCX]:
    This tool can read the contents of the HCX namely:
    To do this in the expert mode gpsdaemon.exe /e, then select 'Garmin Interface' tab
    1. Uncheck option 'Close port',
    2. Click on 'Unit ID' to start the USB connection
    3. In 'Packet ID' enter '60', which stands for read (not published by Garmin)
    4 Check 'Send Data' and enter '2'
    5. Enter the data at the end, the first byte is the region of ID (eg 03 - Basemap), for the memory region that you want to read. Then enter (e.g. 03 on position 1)
    5. Click Send.
    If there is something to read, the bytes in the window will appear and you can see what is stored in the region. The Basemap is quite long, so stop the transfer with "packet receiver > deactivate" you know already the card ID on the first bytes.

    Task: Find the area ID of the eTrex Vista that includes the Marine POI.
    In the 60's this is 31.
    The device sends 16 bytes after the string "GARMIN Americas Marine POI", if this is implemented in Vista, probably in another region ID.

    The region are IDs in hexadecimal to enter 09, 0A..10..1F, 20,...FF.
    The region of IDs are the same practically for all devices:

    A few well-known are:

    03 base map
    05 boot block
    0A card memory
    0C loader (not readable, is used as a cache for flashing the firmware.)
    0D serial number of the unit and other
    0E firmware so device software
    20 unknown
    2E - 29 FF - s unknown
    31 IMG Americas.Marine.POI at the 60/76 CSx
    F5 chip firmware etrex MTK
    F6 chip firmware SiRF 60/76C(S)x

    To write to a region, you need a 60-byte header (very nice how-to in the D005900A of the marine POI) (e.g. with a hex editor) before the data in the position 0x32 which is the region ID, and the length of data to write twice as a 4-byte words once in 2C-30 (length + 0A) and a second time at 38 to 3B length without offset, Low bytes first. Then rename such as irgendwas.rgn and start irgendwas.rgn with updater.exe.

    It's pretty much fool-proof, but you should not write anything in the boot block region 5. It's like the BIOS on a PC.
    I'm guessing the text i've put in red above achieves the same result as:
    (i) changing the .img extension to bin; and then
    (ii) either using makergn.exe to compile the rgn properly with intended target Region ID in hex, or saving the bin as an rgn file in RGN_Tool and then changing the incorrectly saved '33' at offset 0x32 to '03' [region 3 for gmapbmap storage], '0A' [region 10 for gmapsupp] or '31' [region 49 for gmapprom] or '32' [region 50 for gmapoem] before flashing the saved RGN file.

    I think it's possible that not all all older units have region 50 available for an OEM map and some units with media cards maybe can't save any map on board other than the basemap.

    Flashing to region 10 [hex 0A] in a unit which doesn't have a media card slot [e.g. SP 2720] will save the supplementary map to the unit's internal memory region 10 whereas the same flash for a unit with a card will save gmapsupp.img to the card's Garmin folder as mentioned above for the eTrex. Tested on SP 2720 and c320 [SD card inserted].

    A custom splash screen can be done by flashing a GIR_Editor modified logo after opening the bin file in RGN_Tool, saving as an rgn file and then checking that 0x32 is saved as 10 [dec 16] before flashing to the unit. I accidentally overwrote the logo in my SPc320 and was able to flash a modified nuvi 3xx logo to it, seems to work ok so far.

    The dumper in Full Mode will save map regions happily to the same folder as gpsdaemon.exe into a folder it creates named 'DUMP--StreetPilot 2720 Version7.20' in the case of my SP2720. It will write a tmp file 'RegionDump.tmp and the final file name is RegionDump--xx.hex where 'xx' is the hex region #. When the dump for the map region is renamed to *.img it opens in GMAP_Tool without error. The entire allocated space of the region is dumped however. 2720 has 16MB available for the basemap so the resultant image size is 16,777,216 bytes exactly 16MB whereas its actual basemap size was only 10,493,952 bytes or ~10MB. The problem is compounded with regions which share memory space [dec 10, 49, 50 i guess*(nup, wrong! see edit)] as it seems that dumping one of them also dumps any free available space as empty bytes. e.g. If the map in region 10 is only tiny, as is the case in my 2720 where gmapsupp.img is 84KB Raratonga, the dumper will take forever writing the entire available free space on top of that which happens in this case to be well over 1GB. So the more available free space, it seems the longer the dump will take. The option is there to kill the Packet Receiver of course, provided you're sure all the valid data has been written to the tmp file. Right clicking the tmp file while it's still being written will update its size to get an idea. Empty FFs can then be removed from the end of the file.

    Now here's my current problem: I can't get some regions to dump with the 2720, in particular the logo region 16 [10]. I follow the same procedure as with dumping regions for the maps, but get no dump file, nothing other than the packet info on the screen:
    Code:
    Please Login or Register to see the links
    For regions that don't exist, a pop-up message is given to that effect. Region 16 [10] doesn't do that, the unit initializes then reboots almost immediately.

    I can dump fw_all from 0E [region 14] and it matches up with fw_all.bin when extraneous trailing FFs are deleted. Region 5 dumps but is incomplete, but i don't think that's unusual.

    Similarly using the 'data to the screen' as per the method detailed by juergenss for the basemap for example, using 03 will write onto the screen [takes hours for that, i stopped it after about 2 hrs] The data can be copy/pasted into a text editor using Ctrl C/V and i suppose can be used in a hex editor somehow, i have no idea how to do that. But ... 10 [region 16 logo] won't write to screen either so i think maybe it's protected. Or, another distinct possibility: I've simply stuffed up [again].

    Any suggestions for dumping a protected region, and/or corrections to the above?

    *EDIT: I guessed wrong. In my 2720 region 50 has a limited memory space, only 1MB consistent with it being intended for small maps such as dealer POIs. Small non-NT maps seem to work in it ok provided they're under 1MB of course. It seems certain that regions 10 and 49 do share memory however [makes sense as erasing the supp map from region 10 with command 'erase' from Sendmap20 frees up space for the primary map in the region 49 of units such as SP27x0].
    Last edited by Neil; 27th November 2014 at 11:55 AM.
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  4. #23
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    Update:

    StreetPilot 26x0 uses a different method to dump which combines elements of the 'Packet Data' method described by juergenss and the straightforward/direct 'Region Dump' described by Kanopus which works for me with SP27x0.

    In 'GARMIN Interface' tab, this is the procedure for 26x0 StreetPilots:
    1. Press Open in Port field.
    2. Enter desired region [use hex] in Region Dump field.
    3. Press Start. [Dump doesn't start as with SP27x0].
    4. Go to Packet Header field, enter '60' in Packet ID [HEX] window.
    5. Check Send Data.
    6. In Data bytes to send [DEC] window enter '2'.
    7. In Window 1 of Data to Send [HEX] enter the required region again.
    8. Press 'Send' and the Region memory dump will start to a DUMP folder in the same directory as GPSDaemon.exe.

    [Only registered and activated users can see links. ]

    26x0 doesn't have any on-board mapping other than the basemap with maximum 16 MB allocated to region 3 same as 27x0. Attempting to dump regions 49 [hex 31] or 50 [hex 32] curiously gets regions 16 [hex 10] & 15 [hex 0F] instead. Region 14 [0E] for fw_all dumps successfully but has only 4MB maximum available, much less than 27x0's 10MB.

    Unfortunately no usable data in 2610's region 16 to reconstruct logo.bin. Full of 2.87MB of empty FF's. Any clues from the NSEs or other experienced ppl, please?

    I haven't been able to get SPc320 to dump any region at all. So do the old hands have ideas on that too?
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  5. #24
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    Another Update:

    I've had no luck trying to dump regions from a SPc320 which has regionalized memory similar to the older StreetPilots and no visible file system as in later SPc5x0 and nuvi units. Neither of the above methods work and nor does using Dump 0x04. Anyone have any suggestions? I'm getting a bit lonely here talking to myself, maybe i should have just left the above posts back in [Only registered and activated users can see links. ] as some interest was shown there ...
    C'mon you old guys, you can't have forgotten this stuff surely?
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  6. #25
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    'Struth! I can't have offended every single one of you old experts surely? Is it because i called you 'old guys'? I can see who has read this thread you know ..... I meant 'old' as in 'experienced'. What about if i say please a lot? Even better, wot if i promise not to make long, rambling, almost incomprehensible posts any more? [i won't do it any less either ....].

    Want to know:
    1. How to dump from SPc3x0.
    2. How to successfully dump logo from rgn 16 of SP26x0/27x0.
    It can be your Chistmas for me. ...ohh forgot: please?
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  7. #26
    Master
    Join Date
    Nov 2010
    Location
    Posts
    192
    Rep Power
    49

    Default

    How to write back binary file to the unit?

  8. #27
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    @bpb
    Flash a region back via Updater.exe using boot.bin and the relative *.bin file combined as xxxx01000yyy.rgn. Just be sure your compiled rgn file has the correct region hex number as described in 'Tutorial 2' of initial post and P#3 here: [Only registered and activated users can see links. ].
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  9. #28
    Master
    Join Date
    Nov 2010
    Location
    Posts
    192
    Rep Power
    49

    Default

    @Niel Thanks
    I'm just looking for lazy way to flash back a region without preparing the rgn nor SD card file preparation.

  10. #29
    Garmin/GPS Systems GMod. GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,769
    Rep Power
    1568

    Default

    For the old 'region only [ie no visible file system]' units there are only a few ways depending on what you need to flash, the usual being with *rgn file via Updater.exe of course as you clearly know well. Another is using SendMap to flash a supplementary detail map to region 10 [hex 0A], or invoking WebUpdater directly with cmd pmt or a bat file for some map updates such as primary detail map to region 49 [hex 31]: [Only registered and activated users can see links. ] but i guess you're already aware of that method as well.
    I simply don't know any other methods not involving the above.

    Certainly there are no rrgn/xrgn/ergn commands in the old unit fw which will allow using txt commands with ldr.bin on a media card in any case. It's possible to directly flash regions with just a *.bin file saved as an *.rgn [without boot.bin] as it is in many modern units but probably a little safer to do it with boot.bin included for the specific unit in the rgn file.
    I consider you one of the 'old hands' bpb, I haven't got any further solving my problems detailed in P#37, do you have any solutions or suggestions for me? Please ... [Only registered and activated users can see links. ]
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  11. #30
    Important User GPSdaemon:extract the files contained in the GMAPSUPP.img file
    GPSdaemon:extract the files contained in the GMAPSUPP.img fileGPSdaemon:extract the files contained in the GMAPSUPP.img file
    Butters's Avatar
    Join Date
    Jul 2017
    Location
    CA
    Posts
    1,461
    Rep Power
    1058

    Default GPSDaemon full mode

    This particular older application has tripped-up plenty of experienced ppl. That's because even tho' it has an EXE which starts the GUI (Graphic User Interface) it relies on command line use to start it in the two more advanced modes, whereas more modern software would usually have those functions enabled by selection on the GUI itself. So to start the program in either 'full' or 'export' mode, you need to NOT have the GUI open and then run the relevant command. For ppl not familiar with cmd pmt use that may seem daunting but there is an easier way to do by use of a batch file (BAT) containing the command. I've attached a ZIP file which contains two *.bat files to start full and expert mode as well as the gpsdaemon.exe itself. Extract the ZIP file somewhere convenient, even the desktop is fine, and you'll have a folder named "GPSDaemon_with_BAT_files". Open the folder and double click the BAT file for the task (full or expert mode), the GUI will open in that mode and then proceed to follow the step-by-step guides in Post #22 or Post #23 depending on device.
    Attached Files Attached Files

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •