no problem
contact
N50 � 58.824
E004 � 12.488
ALT 23M
Icons are 24x24 size because that is the max that Street Pilot can take. I do not know what is max Honda Connect allow. Street Pilot can only play build in tones so it should make DingDing sound when alert is active. Again I do not know if Honda Connect allow .wav or .mp3 audio.
You need to test via simulation to know if
1. It's correctly using desire alerts (make sure you only have my .gpi's under POI directory)
2. It's working correctly (directional wise)
Alerts are searchable so I suggest you use that to make testing easier.
If you give me a test coord (lon,lat) I can build a test .gpi for you to try to see if larger icons and better audio can be used under Honda Connect.
Last edited by osiris4isis; 18th November 2015 at 10:24 AM.
no problem
contact
N50 � 58.824
E004 � 12.488
ALT 23M
i am sure i have no sound , no ding dong only little icones
Coord need to be near/on a road or alert won't triggered. Pick it near where you would drive to test.
Let make it simple, coord of intersection where redlight camera would be. Also indicate direction of camera pointing. Would be nice is it's in decimal degree format (lat=50.9804000 lon=4.2081333) I don't need ALT.
Update: How about this? Redlight camer at intersection of Hof Ten Houte and Dries 50.97972,4.20923 travelling southeast. You must be at least 200m northwest of the intersection and driving southeast toward the intersection. Icons should be 44x44 and .wav audio is used
Spoiler: .
Last edited by osiris4isis; 18th November 2015 at 12:22 PM.
I installed the new file and I went to a dozen kilometers .
out of home I did not see the icon you placed a hundred meters away, but well on the way back .
it is larger and therefore more visible than the other file, but still no sound
so I went to an intersection or there is a safety cam tricolor lights, and no alerts
only appeared so no icon and no sound
the parameters are:
N 50 � 57 101
E 004 � 09768
N211 intersection AND N47
address: T KINSTRAAT 95
1745 Mazenzele
I hope I answered correctly that you want
Ok, from your description; it sounded like using the new .gpi (with one test redlight alert), you are driving wrong way. BTW, it's not X meters away from ANY direction. It's at least 200m meter away northwest of the intersection on that street (Dries) The redlight is at the intersection, but the alert is set to triggered when travelling southeast toward it. But since it's placed from 200m away, it won't triggered unless you hit it (that is why you must be MORE than 200m away and driving toward it) If you use search you should see only two names, one will show the actually redlight 44x44 icon and the other show a small white flag (this is where the alert is set to triggered) To eliminate any confusion, make sure only that .gpi is under POI or you might potentially confused it with other alerts. We have to make absolutely sure we are testing the correct alert or trying to get audio working will be impossible. If you see the larger icon, it's a good sign that you're testing the correct alert. Now you have to make sure that it's triggering. Note that you will see the 44x44 redlight icon regardless of triggering because it's just a POI marker. The true test is the directional triggering of it (and that why the white flag icon is important) Is this the large redlight icon you see?
Here is diagram that should clarify what I'm saying.
![]()
Last edited by osiris4isis; 19th November 2015 at 12:54 AM.
Are you saying there is a real redlight camera at 1745 Opwijk (there is no 1745 Mazenzele)
If so, which direction is camera pointing? Northwest, Southeast or East? Note that the direction you have to drive to triggered the alert is 180 deg opposite of camera direction.
Last edited by osiris4isis; 19th November 2015 at 01:49 AM.
Hello
yes the GPI is installed in the poi file. Then the icon is
than before but still no sound. The traffic light appears well over 200 meters from the alert point
The traffic light signaled yesterday is a real red light camera and he
is located at the crossing of N211 steenweg op vilvoorde and
steenweg op brussel of N47 to Opwijk , the traffic light is towards Baardegemstraat
sorry for late reply but more than three days without pc and internet connection problem this morning with my laptop
So you're seeing icon size bigger (44x44) right? And towards Baardegemstraat means travelling south on
So you're seeing the bigger icon (44x44) right? And towards Baardegemstraat means travelling south on N47?
Bookmarks