Thread: Mio Spirit 6950 flash disk corrupted no USB connection

No, you cannot, the information in the "device" file is different for each model of GPS MIO.
I will try to get the information from the "device" file of the MIO Spirit 6950 on the web.

Edited:
I think I already found, try this:

Spoiler: Method 1(Interface with TMC):

1. Download the interface [Only registered and activated users can see links. ]
2. Extract with WinRar, in the folder "SD" there is a folder with the name SEEKER2_T600_EEU ".
3. Rename the folder "SEEKER2_T600_EEU" to "TATA3_T5026".
4. Copy the folder "TATA3_T5026" to an SD card, insert it into the GPS Mio and restart GPS.

or

Spoiler: Method 2(Interface without TMC):

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

If you want to extract the flash (ROM) from the Mio Spirit 6970 to place it on the 6950, I think it is compatible, because they both have pretty much the same hardware.
The process is a bit long and you must know what you are doing, my English is not good, I cannot give you the instructions.
I know three programs (there are more) to run the WinCE ROM extraction process, I use NDumpCE, you must use the version for winCE6.0, if you're curious, here are for winCE6.0:

Spoiler: NDumpCE6

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Another widely used one, you can find here at 4pna.com:

Spoiler: DiskRW

Code:

Please Login or Register to see the links

Beware of extracting the ROM, if you don't know what you're doing, don't do anything.