Everything in threes is perfect (IntMem, SD card, All Android) iGO 9.6.29.596752 based

**dinesh** · 7th December 2015, 10:26 AM

Hey Wojpen,
1st of all, a big thank you for sharing! You are truly a genius.

I request you for a special help regarding my typical issue as mentioned below:

1. I am using Blaupunkt's Cape Town 940 (2 DIN car Infotainment system) running on Android 4.4.1 (JB)- rooted device.
2. I am using iGO 9.6.29.596752 (as posted by you)- working perfectly.
3. I have used other version of iGO posted in this forum- all worked fine.

But, I face one problem in all the version of iGo Primo that, when there is announcement, iGO primo reduces my multi-media volume to 7%- something which you cant here.

So, I used Volume Locker from Google playstore- which helps me to restore the media volume immediately after announcement. This is a temporary solution I worked out.

Another problem is that, It mutes my mp3 song for a while when announcement is going on. I could not fix or find a solution for this. I searched a lot in various forums on this subject.
When I use other GPS navigation Apps (like Sygic or Mireo's Dont Panic), it does not mute or pause mp3 songs- rather the announcement and songs can be heard same time.

I tired to make changes in sys.txt as mentioned below but nothing worked for me.

[sound]
working=1
dev_channels=2
dev_bits=16
dev_smp_rate=48000
dev_buffer_size=9216
csv_voice_enabled=1
ding=0
ding_muted=1
os_volume=255
user_volume=255
voice_volume=255
media_volume=255
mic_volume=255
effect_volume=255
guidance_volume=255
os_muted=0 ; 1 - sound off
maneuver_chimes=0
mute_os_key=0
queue_length=200
sound_q_length=200
use_os_volume=1
pause_mp3_sooner=0
suspend_time=0

Can you please help me to fix these 2 issues:
1. When iGO Primo annoucement starts, it automatically reduces my media volume to 7% ( by the way, my Cape town 940 device has separate volume levels for media/dvd/nagivation/radio etc) which you can set from 0 to 100%.
It should not reduce the volume.

2. It should not pause mp3 songs during announcement
I have tried all the combination in navigation_audio_stream=3 (4,5,etc), but nothing worked for me.
I want the announcement and mp3 to get played same time.

Look forward for your invaluable help.

Thank you, WojPen!
Regards

**alazgreg** · 8th December 2015, 08:36 AM

Thank you djeman & WojPen nice job, but on my device Lenovo tab2 A7-30hc i have problems the resolution is 1024x600.
When i start the program and my device is on portrait mode its ok

23mlutk

when i turn the device to landscape mode i got this

14130v7

when my device is on landscape mode and i start the program i got this

68ab0g

i use the sys.txt included in your download.
thanks in advance for your help

**wojpen** · 8th December 2015, 08:44 AM

Hi,
Install ScreenSpecs apk ( free in PlayStore) and run.
Check here screen (vertical and horizontal) with this program.

regards wojpen

**alazgreg** · 8th December 2015, 08:52 AM

Originally Posted by wojpen

Hi,
Install ScreenSpecs apk ( free in PlayStore) and run.
Check here screen (vertical and horizontal) with this program.

regards wojpen

ok i got 1024x552 and 600x976

**wojpen** · 8th December 2015, 09:08 AM

Hello,
If you used the "My" package? as a whole - have a file data.zip multimode.ini file such records (check it):

[modes]
; mx = WidthMin..WidthMax, HeightMin..HeightMax, Folder
; OR
; mx = Width, Height, Folder

m1 = 400..480,196..320 "480_272"
m2 = 234..320,400..480, "480_272"
m3 = 768..960,400..600 "800_480"
m4 = 480..600,700..960, "800_480"
m5 = 1024..1280,552..800 "1024_768"
m6 = 600..800,960..1280, "1024_768"

*for attempts to do so

[modes]
; mx = WidthMin..WidthMax, HeightMin..HeightMax, Folder
; OR
; mx = Width, Height, Folder

; m1 = 400..480,196..320 "480_272"
; m2 = 234..320,400..480, "480_272"
; m3 = 768..960,400..600 "800_480"
; m4 = 480..600,700..960, "800_480"
; m5 = 1024..1280,552..800 "1024_768"
; m6 = 600..800,960..1280, "1024_768"
and insert the following lines:

m3 = 900..1050,450..620 "800_480"
m4 = 550..620,850..1050, "800_480"

save the changes and confirm the update archive.
*Remove the contents of the folder SAVE and start again.
Let me know what worked and show the screen -
Navigation Menu / More / Help / About /
On this screen you are given the actual image size. Take a screen horizontally and vertically.

PS.
If that does not help you do so:
[modes]
; mx = Width Min..Width Max, HeightMin..HeightMax, Folder
; OR
; mx = Width, Height, Folder
; m1 = 400..480,196..320 "480_272"
; m2 = 234..320,400..480, "480_272"
; m3 = 768..960,400..600 "800_480"
; m4 = 480..600,700..960, "800_480"
m5 = 1020..1280,500..800 "1024_768"
m6 = 500..800,900..1280, "1024_768"

As you can see we change the parameters correctly display the image.
The first attempt relates to the use of another interface.
second - changing the resolution to the proper interface

PS2 Probably - bug is in line m5 ( in orginal multimode.ini)

Your real res. - in landscape is - 1024x527, in multimode.ini is 1024x552

If you are using and solutions - image should be larger

**janch** · 8th December 2015, 09:29 AM

@dinesh

I have cra*cked version of the original iGO Primo directly from Blaupunkt Cape Town 945...PM me if you wish to try it..I think it should work exactly the same way as the original. But I cannot test it's behaviour because I don't have Cape Town 945 on my hand.

**alazgreg** · 8th December 2015, 09:41 AM

Well after these changes i have

2a5gjzp

and multinode is

[modes]
; mx = Width Min..Width Max, HeightMin..HeightMax, Folder
; OR
; mx = Width, Height, Folder
; m1 = 400..480,196..320 "480_272"
; m2 = 234..320,400..480, "480_272"
; m3 = 768..960,400..600 "800_480"
; m4 = 480..600,700..960, "800_480"
m5 = 1020..1280,500..800 "1024_768"
m6 = 500..800,900..1280, "1024_768"

**wojpen** · 8th December 2015, 09:50 AM

Try this in sys.txt

[rawdisplay]
;force_renderer="RENDER_MOYA"
screen_x=1024
screen_y=527
screen_x2=600
screen_y2=951

!!!Delete folder SAVE" and clear cash memory