Thread: iGO Skin Lastun X7 up to v.15.06.2015

Welcome,
Another novelty this year yet for users Skin Lastun:
Lastun multi-X7-800-05102014



Thanks to Claudiu Morar & gpsforum - good job!

description:
For Reasons of "net" only this time I will post simple branding.

1. Fixed two issues, GLONASS and route_del.

2. Fixed other small bugs ... still are.

3. Depending on the setting of the rooms,

* I totally changed this function THUS are now only two rooms: Static 2D / 3D and 3D Dynamic. Why so called? because the first room does not use variables in terms of speed, and has only the minimum and maximum distance of 3000 m maximum value Gradually move toward the minimum and the second will take the first room but These values will fluctuate Between them in terms of speed and will apply only on 3D because it seemed silly to zoom in 2D fluctuate depending on speed. otherwise if you are in 2D for the camera settings are "disable".

* For fine adjustment relief I turned off because it can mislead and having negative values. You just need to make settings in the first room, static, and in the second to set values for speed. Simply, after adjust the minimum and maximum values and default value That, if you are static maximum value will be constant up to 3000 m maneuver in Dynamic values will vary depending on the minimum and maximum set speed in this room.

** I added a navigation shortcut and overview will be enabled this longclik. The values for the two modes are independent settings, the less speed ....

* For a better visualization of variables extra_settings I added an option to use a decimal multiplication Percentages rate. maybe there ought to go and over 1, up to 1.5x but there is still time.

** Theoretically any resolution can be set this values That are close to what you want, but be careful at high zoom (low in settings) will not be able to set a very high angle, you have to "Combines"

Spec. Thx for kimyaci & igo8

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Regards wojpen

I'm sorry I did not notice a colleague dansidrago post
[Only registered and activated users can see links. ] - post2
Regards and sorry again