Thread: Skin iGO nextgen by pongo (DISCUSSION)

I'm coming from an iGO Primo setup on Windows CE where this behavior (zooming in and out at turns) was the default behavior.

In the "Map appearance" I have "Viewpoint" set to "Normal" and "Enabled user settings" turned off.
In the "Automatic Overview Settings" I have "Automatic overview" enabled and "Automatic Overview Mode" set to default.
In the "Cockpit" settings I have the "Mini maneuver" enabled, the "Dist Hide Mini Maneuver" set to 1000m and the "Mini Maneuver with Junction View Visible" also enabled.

The version of the skin is 2017-01-22.

With these settings the map zooms out to give a general view of the journey when traveling at high speeds, but when slowing down to make a turn the map stays at the "Normal" viewpoint level.

If someone has a solution, I'm all ears.

@gpsseeker
sys.txt

Code:

Please Login or Register to see the links

@gpsseeker,, you have to put; Enabled user settings-on ,and do not activate,; map angle dependence on speed;
Smart zoom must be activated,for this you need to put viewpoint first to manual, enable smart zoom, then switch back viewpoint to normal
If dont work, make a fresh install, sometime things go crazy

Well, I'm still trying to solve it.

First of all let me make clear that I always use the navigation in 2D, so I don't want to change tilt. I want only to change the zoom level.

I added these lines:

[camera.roundabout]
enabled=1
[camera.intersection_zoom]
enabled=1

prompted by Andrey Form's post, but things don't work properly. It seems that settings worked only in roundabouts or only for higher speeds in simulation.


edit: I have also one question to add. When approaching a tunnel I get a direction icon top left corner and the announcement to drive straight. Is it possible to remove directions for tunnels or/and the voice that gives instructions to continues driving straight?

@gpsseeker
pongo split in 2019 for the convenience of speedcam into two parts,
speedcam.zip - notification management,
speedcam_mod-content (icons)

This made it possible to change the encoding and icons without editing speedcam.zip main file.
And so, speedcam.zip and speedcam_mod - this is a kit
speedcam.zip, speedcam_mod_GR_AF.zip - this is a kit
GR - Greece code speedcam
AF - modification speedcam Andrey Form (icons, alert codes and their names, and other settings)

@gpsseeker
Yes, the plugin.ini file is being edited.

Once again, you should always have 2 files in the UX folder
\ux\speedcam
\ux\speedcam_mod

If you use AF, you need a kit
\ux\speedcam
\ux\speedcam_mod
If you change the encoding
\ux\speedcam
\ux\speedcam_mod - Replacement ( the name of the Mod does not change, we change one Mod to Another )