Thread: Create a route from picture Nextgen

@rider
Pay attention - the coordinate format must be the same for the geotag photos and the selected coordinate input format selected in Units and Formats - Coordinate Display Format.
It's not same for example - N 30 30 30 E 10 10 10 and - N 30,5083 E 10.1694
And in reality it is the same destination.

Aman, rider. Google search

If your photo is on a PC, you can find the geotag by right-clicking the image, then clicking “Properties.” In the “Details” tab, you'll see a section called GPS, which includes Latitude, Longitude, and Altitude (if there is one tagged)

And on phone

Originally Posted by nens

...must be the same for the geotag photos and the selected coordinate input format selected in Units and Formats - Coordinate Display Format..

Route>Destination>Coordinates>Arrow right in bottom menu > UTM coordinates and "units and format"

At some point Pongo "messed up" the skin so much that the DCIM order and the variables in the SYS.txt no longer worked.
IMO @Titanic once created a suitable ux (zip), but that was years ago...

That's why the SYS entry must be adjusted accordingly:
-------------------------------------------------------------------
[poi]
picturepoi_folder="/storage/emulated/0/DCIM/Picture"
use_mixed_poi_icon=0
use_multi_poi_icon=0
multi_poi_overlay=0

[attractions]
user_picture_path="/storage/emulated/0/DCIM/Picture"
; End off SYS
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
if you then select POI search -> own images
If you select the country and a city above, you will also see the nearby images for selection
*also type [i] and you will get the image capture+date
*tap on the white field [] below and you will see the corresponding image

Different codebases, regional settings, different software setup on different systems
You can't blame anything else, it's exclusive to the user, rider