VR on android Pie SOLVED ????

**rondoan** · 12th January 2020, 07:47 PM

Originally Posted by modemakias

also i wonder if someone has tested on android 8.x or 10.

I already wrote:
Teclast-Tablet with Android 8.x; World,Palestina an Gift installed, but only internally (primary).
Up to Android 7.x; NG Gift/Israel never supported VR on a Tablet/Phablet, i never succeeded. Now it's great on a 10"-Tablet !
+-+-+-+-+-+-+-+-+-+-+
NG with VR

**rabenkind** · 13th January 2020, 10:32 AM

Hi all together and to @modemakias especially big thx,

I tried the igo pal. Basicly it works fine, but with VR iniciate navigation forgets the navigation order after shut down and restart pal.
When I start a navigation via favorites adresses or by manual inserting the adress it do not loose the navigation order after a restart.

pal is placed in internal memory: storage/emulated/0, just like whatapp and so on; only the content is placed on sd and the phone I use is a homtom S99

**rondoan** · 13th January 2020, 11:30 AM

a Route created via VR takes a little longer until it is actually started. Check this once and tap on Route overview. There may still be "Start navigation". Shortly afterwards the Route is handed over and is available when you start up again

in addition, the Destination-Address entered with VR is saved in the List [Last Destinations], so it is there the next time you start
** we say in Germany: "many Ways lead to Rome" (viele Wege führen nach Rom)

**rabenkind** · 13th January 2020, 02:22 PM

@rondoan

thx. Checked Route overview and clicked start navigation: Problem is solved.

Maybe I was to fast at first or is this a little bug?

**rondoan** · 13th January 2020, 03:42 PM

@rabenkind

to fast

when entering the Keyboard after transferring the Destination, the prompt [Start navigation] appears. few Seconds, then it is automatically adopted. A Security to break off if necessary. This is not so obvious when entering VR

**rider** · 13th January 2020, 06:04 PM

@rondoan
In sys.txt :

[interface]
start_navigation_time=100

(100 = seconds before start navigation.
Choose how long for yourself.

**rondoan** · 13th January 2020, 06:46 PM

right! a long Time ago, that was also with Primo. I forgot because I never needed it

No!

with this Entry in SYS comes Overview and Calculation must be started manually

AFAIK better without this Entry and accept Standard

**modemakias** · 13th January 2020, 10:06 PM

@De5i
the apps from #2 post is original... without changes only the fixes..
i have write: "Here without changes original apps"
so uninstall/install again from #3 post.