If I understand correctly , you are missing the 2D3D Button
Settings / Skin settings / Quick Menu settings / Cockpit button - There you can activate the 2D3D button
If the Quick Menu is activated you can do the same at the Quick Menu button
I use iGO PAL 9.8.27.719974 with skin mod by arimi & Vamibg. Excellent software btw
I just have a problem with the 3D view. In overview mode
I want 2D with north up. I did it. Works well.
But I also only want 2D (without north above ) in normal mode.
How should I set this?
Thank you in advance.
If I understand correctly , you are missing the 2D3D Button
Settings / Skin settings / Quick Menu settings / Cockpit button - There you can activate the 2D3D button
If the Quick Menu is activated you can do the same at the Quick Menu button
I think he want only 2D mode at all.
I had already activated it but after every signpost or after overview mode I have to push this button again and again.If I understand correctly , you are missing the 2D3D Button
Settings / Skin settings / Quick Menu settings / Cockpit button - There you can activate the 2D3D button
If the Quick Menu is activated you can do the same at the Quick Menu button
3D mode is nice but rather confusing, the street you want to drive into first seems far away but suddenly it's close by and I miss the exit very often.
In 2D mode I don't have that problem, it seems more natural like an old fashioned map.
Yes, correct
I already understood that you want to drive in 2D mode!
But you're right, it always jumps back in 3D mode.
You can only choose between 2D or 2D north
I think you are the only one who needs such settings
Next time please ask your question in skin section
Last edited by Golom; 21st December 2019 at 02:42 PM.
@alfazero: ? generally tried with a User-defined map setting and viewing angle 'normal'! ??
I was thinking, maybe you could fix it with settings in sys.txt?
I already looked around in sys.txt and on the forum but I didn't find the solution yet.
My sys.txt:
[rawdisplay]
screen_xy="auto"
dpi=240
[gps]
accuracy_workaround=0
[folders]
content="/storage/6336-6165/iGO-content"
[map]
map_mode="2D"
No,its nothing with sys.txt . Perhaps a bug in Skin . You can try to play with the map settings.
The same settings work in Pongo Skin .
Thats why I say: Ask in Skin section
Bigger chance that someone knows about the problem
Thank you very much for the advice
But like you said, I'm probably the only one who needs such settings![]()
Bookmarks