Thread: NextGen crash in exact tunnel

Hello wants to update that you added the rows

[gps]
Accuracy_workaround = 0

Corrected the collapse of the tunnels and now the software does not collapse and works well checked in the tunnels that appeared in the problem.

==========================================================

Need more help,
As I mentioned, the tunnel's view works fine , the software works fine and doesn't crushing.
A new problem occurs is that two tunnels separated ,between the tunnel and the second tunnel about 400 meters to both directions , south and north that have two tunnels in each direction.
In the second tunnel, two cameras were added to the speedcam file, and I don't receives a voice alert.
What happens in the second tunnel in both directions is that a tunnel display is coming out earlier than expected and the indicator is stuck until the satellite returns and then it continues to navigate as usual, so then I can realise that I do not recieve a sound warning on the cameras in the tunnel because it's stucked (I have voice and visual alerts on all the other cameras).
1. Why there's no warning sound on the cameras inside the second tunnel and how can I fix it?
2. Why the display in the second tunnel coming out earlier than expected and the navigation's indicator stuck until the identify of a satellite?
hope to solve it asap

Hi, similar problem here.
iGO is crashing when entering the tunnels (lost gps signal), all tunnels. In simulation there is no problem, everything works fine. I was already changing workaround from 1 to 0 but without positive results. Any idea what this can be?
IGO ver. 9.18.27.681611 with Pongo skin, maps Here 2018.Q1

Hi

no idea... --> my settings (Galaxy S2 and S5)
[gps]
accept_position_at_precision_change=1
accuracy_workaround=1
location_net=0
location_gps=1
background_navigation=1
location_log=0
location_log_filename="gpslog/LocationManager"
min_valid_heading_speed=0
first_valid_precision_distance_threshold=0

[gps.igo_connector]
horizontal_accuracy_threshold=10000
position_validity=-1

@BIBUOT

You already posted this, but my iGO Israel (otherwise working perfectly), when I put your settings, does not start at all.

Solution from disoft should solve tunnel problem in all versions, unless there is some extra ux or skin that generates it.

... or try to set Android location to "Device only" (GPS).

Hi

If you have that in sys.txt...

[gps]
accuracy_workaround=1 <--- must set this value to 0 or comment line by ;
location_net=0
location_gps=1
background_navigation=1

try...and say if Ok after that - please

@+ :-)