Thread: Firmware becker active 6 BH00

Hello colleagues, I tested this FW, it installs ok
- the display responds to touch but is decalibrated
- I also tested other firmwares from other GPSs, but I didn't find any that would run. - when you install firmware on other gps, it usually asks for calibration the first time you use it.
This Becker model does not require calibration. - it is not calibrated even with its exe from windows. It seems that my display is not perfectly compatible with this board.
(Congratulations for your site I have a lot of information about gps and navigation systems)
Thank you.

Spoiler: images

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

I tested this exe with the help of windows commander,
I press several times in different places on the display until I reach the exe.
I don't have access to flash with a PC, so I can restore the internal memory.
He says it's already calibrated, don't ask me to press it in the corners. (see in the photo)

Spoiler: image

[Only registered and activated users can see links. ]