Unfortunately swapping exe file doesn't help at all, navi is still restarting, till communicate which I shared with you yesterday.
From crash file we can read something like that:
Spoiler: crush
P.S. Swapping files on full KIA version or CIVIC gives same results.
P.S.S. Swapping on "cured" version of exe file from Alpine gives - "user interface resolution 800x480 is not supported or compatible skin can not be found"
Last edited by Boki; 17th September 2019 at 06:43 PM.
Alpine exe files are deeply modified. You can not use them with other files. They demand their own data.zip and skin.
Try some more things:
- delete all nng (device.nng) files
- delete all Pioneer keys. Inside and outside mobilenavigator folder
when placing another package, be sure
- same folder name
- same exe name
- same folder structure
- proper resolution, written in sys
- delete all save folders (inside HU and external receiver)
Last edited by Boki; 17th September 2019 at 06:58 PM.
iGO Primo 9.6.2.209584 in Pioneer AVIC F260
Spoiler: Avic F260 SD Content
Last edited by apolyps3; 17th December 2019 at 04:11 PM. Reason: Reupload new link
•●» If you find any dead links on my posts please PM me & I'll try to fix/reload «●•
pioneer avic f940bt
[gps]
port=2
baud=9600
Last edited by rope; 12th October 2019 at 11:55 PM.
Hi All!
I tested WinCe Primo 2.0 on two devices (F160 - F260) - I tested on city and the highway
I tried several versions but only with v9.6.5.211211 UPX SHELL compression did it work good
I used the original software, one new Class10 SDHC FAT32 8GB card, swapped exe, the sys, and license files (microSD is not good - card reader is not good)
Comment:
Care must be taken when inserting the card to avoid locking - "card is unlocked"
"WinCE CallStack snapshot (function names unknown - map file \Storage Card\MobileNavigator\MobileNavigator.map not found):"
The following section in sys.txt should be placed:
[folders]
app="\Storage card\Mobilenavigator"
has_secondary_root=1
This will eliminate the crash.txt reported error
Download file:
This post requires you to click the "LIKE this post" button and hit F5 to read this content.
_____________________________________
Hi All!
For example, testing F160 has shown that for some devices, the above sys configuration is not good.
So i another method has been found and works with:
[device]
type="Pioneer_NX190_NX266"
sdcard_name="Storage Card"
[folders]
sdcardpath="\Storage Card\Mobilenavigator\Mobilenavigator.exe"
content="\Storage Card\Mobilenavigator\content"
Last edited by vaczak; 7th December 2019 at 11:07 PM.
Bookmarks