I used your multimode.ini file and added it to the sys.txt file:
Igo rotates vertically and horizontally, but does not start.[rawdisplay]
driver=engine
screen_xy="1024_527:600_951/1024_527"
Spoiler: YT video
I used your multimode.ini file and added it to the sys.txt file:
Igo rotates vertically and horizontally, but does not start.[rawdisplay]
driver=engine
screen_xy="1024_527:600_951/1024_527"
Spoiler: YT video
Last edited by Boki; 11th November 2018 at 08:31 AM.
@szymoniskra
Usually some users with little experience, due to ignorance, do not communicate the necessary information to be helped promptly.
Thus, it is very good to communicate the make and model of the device, operating system version and installed browser version or to install apk etc. this already clarifies the matter enough, above all in case some user has the one with which his comments are practically definitive.
In iGO Primo version not Nexgten, some adjustments should be verified, especially in relation to the resolution.
In the market there are many devices with differentiated features ... you can find two with identical external dimensioning but that has nothing to do when configuring the sys.txt or multimode .ini
The useful resolution for iGO will vary if our device has embedded buttons etc, an instruction in the sys will make the Android info bar disappear where the time, battery etc. appears.
Therefore it is essential to communicate the information of your device in a clear way and with an appropriate application.
This will allow you to be advised to use parameters such as tablet = 1 or fulscreen = 0 if you use screenxy = auto in your sys.txt, apart from the changes in multimode.ini
In the image you see how the buttons embedded in your dimensioning influence.
Although as it says Midnight Blues there is a thread for this topic with a lot of commented initiations, but it would help a suitable capture of your screen, which I commented to you for a good purpose
Spoiler: Screenshots
regards
Last edited by Midnight Blues; 10th November 2018 at 09:28 AM. Reason: spoiler
Here is also one discussion about same problem: [Only registered and activated users can see links. ]
There is also extended discussion and explanation how to adopt program resolution in this thread: [Only registered and activated users can see links. ]
Beside that, there is also "Search" button.
This is something that was discussed too many times to repeat all over and over again, because nothing else could be done.
If in all this threads you could not find answers that will help you to solve problem, than you have to admit that you can not solve that.
In that case, best solution is to take only logical step in future - install NG.
I made this thread "Sticky" to prevent further new threads with same problem.
Earlier, before the change in the files sys.txt and multimode.ini, the program worked. \
When I changed the multimode file before, the problem was too. Error in multimode?
@ szymoniskra
sys.txt
[android]
fullscreen=0 ; see status bar
has_physical_home_button=0 ; the buttons are enbebed
tablet=0
[rawdisplay] version 1 fix x y
driver="engine"
force_renderer="RENDER_MOYA"
;screen_xy="auto"
;highres=0
screen_x=976
screen_y=547
screen_x2=600
screen_y2=943
[rawdisplay] version 2 auto
driver="engine"
force_renderer="RENDER_MOYA"
screen_xy="auto"
highres=0
multimode.ini
[modes]
; mx=WidthMin..WidthMax, HeightMin..HeightMax,Folder
; OR
; mx=Width, Height ,Folder
;in this huawei tablet, the embedded buttons are down vertically and to the right horizontally (Observer the bottom point in screen size it is loading without status bar)
;m3 Width 976_547
;m4 Height 600_943
m3=900..1050,450..620,"800_480"
m4=550..620,850..1050,"800_480"
Regards
Last edited by thunword; 11th November 2018 at 11:42 PM.
You only need APK and data.zip from spacific program version, all other files are language files, voices, and other files that could be fond on forum or used from other (newer) versions.
Post larger image, do not resize to such small size That could not be seen (read) without magnifying glass.
On this two pictures you can see real screen size that Primo can use (real resolution).
This dimensions should be used for tweaking multimode.ini file.
Using the latest version is adequate as you say midgnith blues
data+apk and posibble global cfg
But you may have to modify your sys and multimode for huawei
in this multimode 600x943 - 976x547 is posibble, it is the data in sreen size, and it respect status bar and bottoms. (In mi recomand add the posibility fullscreen=1 or loading size) bud the images in your post are ok and understandable diferent ot the initial, regard mod post 45
m3=900..1050,450..620,"800_480"
...........976..........547
m4=550..620,850..1050,"800_480"
...........600..........943
test in auto
[rawdisplay]
driver = "engine"
force_renderer = "RENDER_MOYA"
screen_xy = "auto"
highres = 0
save the save for your favorites, erase it, delete cache, and stop the application so everything is loaded well next sesion.
regards
Last edited by thunword; 10th November 2018 at 11:47 PM.
thunword, It still does not work.
v1.
Spoiler: Multimode:
Spoiler: sys:
Spoiler: Error:
v2
Spoiler: multimode:
Spoiler: sys:
Spoiler: error:
v3
Spoiler: multimode:
Spoiler: sys:
Spoiler: error:
v4:
Spoiler: multimode:
Spoiler: sys.txt
Spoiler: error:
Spoiler: My files:
LAST WARNING!
I will not edit your posts any more.
Use "SPOILER" for images and large texts: [Only registered and activated users can see links. ].
Or I will trash posts without further warning.
Last edited by Midnight Blues; 11th November 2018 at 05:25 PM. Reason: spoilers
Bookmarks