Likes: 
Reply With QuoteYou seem to be having lots of problems with Garmin Units
garmin StreetPilot c510
Garmin nuvi 1690 corrupted flash
Garmin Fleet 670 problem
And now
Garmin Dezl 580 LMT-D Brick
Along with a couple of Car GPS units......
I read all your posts........
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 9 of 9
Thread: Garmin Dezl 580 LMT-D Brick
-
7th October 2021, 07:33 PM #1Member
- Join Date
- Apr 2009
- Location
- Italy
- Posts
- 22
- Rep Power
- 17
Garmin Dezl 580 LMT-D Brick
Hi to all,
Garmin Dezl 580 was updated by Garmin Express with latest firmware and 2022.1 EU maps. After mandatory restarting for the firmware update everything went fine, device booted normally and finished the update process, than map update was done. Device was fine with the new maps everything looks normal even 2-3 manual reboots was done, but the next day when i try to power up the device wont start even 3 hours on a original charger also tried on original usb cable supplied by Garmin. The USB socket is fine because is drawing a little power around 0.2mA. If someone has this problem maybe can help. Cant boot device anymore, no power at all and no usb connection.
Thanks in advance.
-
7th October 2021, 08:04 PM #2Master
- Join Date
- Aug 2009
- Location
- Belgium
- Age
- 77
- Posts
- 1,961
- Rep Power
- 1210
-
7th October 2021, 08:05 PM #3Master
- Join Date
- Jun 2010
- Location
- Hell
- Posts
- 1,948
- Rep Power
- 1208
For the start, try to remove the battery for a few minutes.
It's not that I'm so smart, it's just that I stay with problems longer. (Albert Einstein)
-
7th October 2021, 08:09 PM #4Member
- Join Date
- Apr 2009
- Location
- Italy
- Posts
- 22
- Rep Power
- 17
Yes indeed
Originally Posted by asprin624
.gif ":)))")
So ? All the devices what you read it about were broken by someone else i just try to help repaired.
Last edited by Boki; 7th October 2021 at 08:41 PM. Reason: quote shortened
-
7th October 2021, 08:43 PM #5iGO Enthusiast
- Join Date
- Jun 2014
- Location
- Niš
- Age
- 53
- Posts
- 6,971
- Rep Power
- 4732
More than 13 years member ...
Then you don't have to say you have a problem... makedonac
If you are already trying to help others, assuming you are not taking their money, then you you need to invest much more effort. Read a lot.
And to respond to help here, also to answer a questions from other users.
-
7th October 2021, 10:26 PM #6Important User
- Join Date
- Jul 2017
- Location
- CA
- Posts
- 1,466
- Rep Power
- 1059
"....no power at all and no usb connection" = no way to recover using a software solution unfortunately.
Unless janch's suggestion of removing the battery for a while re-livens it you can strip it for parts because it's dead. I get that you're unlikely to know the history of the device however if it's been cross-flashed without clearing non-vol memory there's a chance region 154 is poisoned, or wrong data has been written to region 5 which is the bootloader. The other possibility is simply that the flash chip has failed suddenly and dramatically.
-
8th October 2021, 10:23 AM #7Master
- Join Date
- Aug 2009
- Location
- Belgium
- Age
- 77
- Posts
- 1,961
- Rep Power
- 1210
Have you tried these steps from Garmin?
Spoiler: Charging a nuviCam or dezlCam Device
From Garmin:
Use the vehicle power cable that came with your device.
A full charge may take up to 6 hours
All devices come with a vehicle power cable to charge the device
This is the recommended method for charging your device.
Also read the info on nuviCam or dezlCam Frozen or Not Powering On <------------Important info...
If that does not work contact Garmin support the Garmin is not that old.Last edited by asprin624; 8th October 2021 at 10:28 AM.
-
25th July 2024, 09:35 PM #8tianzeGuest
i updated my DEZL 770 to version 5.50. i can't enter the system ,automatic restart at garmin screen .about 1 minute.
-
25th July 2024, 10:22 PM #9Garmin/GPS Systems GMod.
- Join Date
- Aug 2011
- Location
- Oz.
- Posts
- 6,360
- Rep Power
- 2502
Probably it's got a corrupt gupdate.gcd loaded in its hidden .System folder. You'll need to load cure firmware if the device won't enter Mass Storage Mode. Read here: [Only registered and activated users can see links. ] and [Only registered and activated users can see links. ] and [Only registered and activated users can see links. ]. Post for further help if needed only after reading thoroughly those guides.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Bookmarks