Open GarminCure, drag the appropriate GCD file to the appropriate space in GarminCure window.
Choose CURE option, and Make Firmware.
After pressing make Firmware you will see the field populated below with a <some figures filename>.rgn and the final message in the message box should be
"Processing OK
"
With finger depressing top left corner of screen, connect your Garmin device to the PC running GarminCure.
The device will immediately turn on and if screen is depressed in the right place will bypass bootloader to allow Uploader to see it.
With finger still on screen press the Updater.exe button to flash the firmware to the internal disk.
This process should produce a Garmin with a flash disk accessible by Windows. From here you can use the rmprepusb program to reformat your internal flash disk.
Once that has happened, return to GarminCure, repeat the process but do NOT use Cure option, but the ORIGINAL option. After I did this I was able to reboot my device normally and I copied the files I received from Lolypop000 back onto the disk.
I have to add, all this started after I formated the device using MacOSX. So, a word from the older and wiser me, don't use OSX to format your Garmin. I do not think the tools available in Windows are available in OSX.
Bookmarks