Thread: How to get bricked 3597 into preboot to cure it?

Maybe there's a screen calibration problem with it. Try moving the holding position very slightly. Up, down, right, left progressively because even a fraction of an inch matters. Or it may be that the screen is not responding to touch at all. I can say categorically that starting with that series and ongoing attaining preboot became a far more difficult task and perseverance does often payoff eventually. Final tip: Open the window first.

Hi Butters

Thanks very much for the advice and your patience. I eventually found the G spot just above the G and got it to boot. I found two files for the 3597 and ran them through the Garmin Cure 3. A 540 and a 550 file. I ran them through the Garmin Cure 3 and then the updater once I got it to boot the GPS. Now only the logo appears on the GPS and then it switches off. I tried both files with no luck. Any suggestions please?