Thread: Edge 820 software version summary

Edge 820 software version 9.10
as of June 6, 2018

Code:

Please Login or Register to see the links

(15.74 MB)

Code:

Please Login or Register to see the links

Changes made from version 9.00 to 9.10:

• New Beta Feature: Extended Display Mode. Menu > Settings > Extended Display Mode will allow the Edge device to act as an extended view of a supported Garmin multisport watch's data fields during a multi-stage activity such as a triathlon. Follow the on-screen Edge and multisport instructions to get started.
• Smart Notifications: [Android Only] Notifications from additional text-based sources like Google Hangouts will now be shown on device. Responding to these should properly send through the expected application.
• Smart Notifications: Notifications that seemed stale or otherwise are not currently being displayed on the phone should no longer be shown on device.
• Smart Notifications: Notifications from text and phone sources will be automatically dismissed when no longer relevant.
• Turn Guidance: Fixed issue where turn prompts would not be displayed consistently while using 2018.10 maps.
• Fixed issue where Virtual Partner time ahead/behind was incorrect when auto-pause is enabled.
• Fixed issue where turn prompts would not clear until Varia Radar had no remaining active targets.
• Fixed issue where device will not power down properly.
• Fixed potential crash when riding a segment against a someone with a very long name.
• Fixed issues where saved networks would disappear after a Garmin Express sync
• Fixed discrepancy between wind displayed on the status par weather preview and the full weather page.
• Added additional information to the Copyright Information page.
• Fixed incorrect truncation of course points names on the course point list page and on the map.
• Fixed issue where a turn prompt and a course point prompt for the same turn would pop up at the same time while riding a course.

Edge 820 software version 9.34 Beta
as of August 8, 2018

Code:

Please Login or Register to see the links

Download (10.53 MB)

Code:

Please Login or Register to see the links

Changes made from version 9.10 to 9.34:

• New Feature: Added Connect IQ 3.0 support.
• New Feature: Physio TrueUp for Biometrics. If enabled, recovery time and cycling VO2Max will sync between Garmin devices that support TrueUp. This requires enabling the feature in Garmin Connect Mobile or in Garmin Connect web. To view the current enabled state, a new My Stats Options page is available under Menu > My Stats > Options. Also note that the device will not currently display activities from other devices, even if the help text from other services say so. To get up-to-date stats, the device will now perform a sync with the phone on the first connection after a power on.
• Added enhanced support for Varia RTL510 radar tail light. As part of this, all ANT sensor processing code has been improved and should be more reliable.
• Functional Threshold Power (FTP) and Lactate Threshold Heart Rate (LTHR) values should be more accurate and in line with other devices now.
• Fixed crash that could occur when switching activity profiles in the middle of a ride.
• Fixed issue where the Edge would no longer connect to old iOS devices after version 9.00's Bluetooth rework.
• Added UI to inform users of the impact of brightness and backlight settings on battery life.
• Added tip to remind users to remove their bluetooth connection from the phone's settings after performing a forget phone action.
• Fixed issue with the device where going into mass storage from a power off state may cause Garmin Express to offer a map update that the device does not need.
• Fixed issue where going into mass storage mode would sometimes be detected as an unrecognized device until unplugging the unit and trying again.
• Fixed issues preventing device-to-device transfers from completing and made improvements to the connection flow.
• Fixed potential crash on the compass page.
• Fixed issue where VO2 max could be corrupted.
• Fixed issue when renewing the phone connection (not common) would cause the Edge and phone to forget each other after a reboot.
• Fixed potential crash when processing audio prompts.
• Improved missed call smart notification UI to more reliably show the phone number instead of 'Unknown'.
• Cleaned up some of the sensor found notifications that could occur in the middle of a ride.

Edge 820 software version 10.00
as of August 28, 2018

Code:

Please Login or Register to see the links

(15.94 MB)

Code:

Please Login or Register to see the links

Changes made from version 9.10 to 10.00:

• New Feature: Added Connect IQ 3.0 support.
• New Feature: Physio TrueUp for Biometrics. If enabled, recovery time and cycling VO2Max will sync between Garmin devices that support TrueUp. This requires enabling the feature in Garmin Connect Mobile or in Garmin Connect web. To view the current enabled state, a new My Stats Options page is available under Menu > My Stats > Options. Also note that the device will not currently display activities from other devices, even if the help text from other services say so.
• Added enhanced support for Varia RTL510 radar tail light. As part of this, all ANT sensor processing code has been improved and should be more reliable.
• Functional Threshold Power (FTP) and Lactate Threshold Heart Rate (LTHR) values should be more accurate and in line with other devices now.
• Fixed crash that could occur when switching activity profiles in the middle of a ride.
• Updated the manual activity upload UI. It will no longer be available if the auto upload setting in GCM is disabled, as this prevents GCM from accepting our upload. If auto upload is enabled, it should correctly reflect success when the upload completes.
• Fixed issue where the Edge would no longer connect to old iOS devices after version 9.00's Bluetooth rework.
• Added UI to inform users of the impact of brightness and backlight settings on battery life.
• Added tip to remind users to remove their bluetooth connection from the phone's settings after performing a forget phone action.
• Fixed issue with the device where going into mass storage from a power off state may cause Garmin Express to offer a map update that the device does not need.
• Fixed issue where going into mass storage mode would sometimes be detected as an unrecognized device until unplugging the unit and trying again.
• Fixed issues preventing device-to-device transfers from completing and made improvements to the connection flow.
• Fixed potential crash on the compass page.
• Fixed issue where VO2 max could be corrupted.
• Fixed issue when renewing the phone connection (not common) would cause the Edge and phone to forget each other after a reboot.
• Fixed potential crash when processing audio prompts.
• Improved missed call smart notification UI to more reliably show the phone number instead of 'Unknown'.
• Cleaned up some of the sensor found notifications that could occur in the middle of a ride.
• Fixed issue where extended display mode could crash when a vertical speed field with meters per second units was configured.
• Fixed battery low prompts for radars when connected as a radar and not included in a light network.

Edge 820 software version 10.25 Beta
as of November 19, 2018

Code:

Please Login or Register to see the links

Download (10.95 MB)

Code:

Please Login or Register to see the links

Changes made from version 10.24 to 10.25:
� Fixed elevation zooming issue with large courses/activities/segments (>100mi or km).
� Fixed ANT sensor battery low notifications.

Edge 820 software version 10.26 Beta
as of December 3, 2018

Code:

Please Login or Register to see the links

Download (10.66 MB)

Code:

Please Login or Register to see the links

Changes made from version 10.25 to 10.26:
� Fixed several crashes that could occur while riding with a power meter
� Fixed issue when coming out of mass storage mode that could cause a crash
� Fixed issue where the GPS data field did not match the GPS indicated by the status bar
� Updated radar tone to be easier to hear.
� Fixed Favero Assioma data dropouts.
� Fixed issues with device transfers feature

Edge 820 software version 11.00
as of January 9, 2019

Code:

Please Login or Register to see the links

(16.00 MB)

Code:

Please Login or Register to see the links

Changes made from version 10.00 to 11.00:

• New Beta Feature: Galileo satellites. There is now support to use the Galileo network of satellites to assist in getting GPS fixes. With the correct GPS firmware, this option can be enabled by selecting GPS+Galileo in the GPS setting. Sync the device with Garmin Express to make sure that the new line of GPS firmware is provided to the device. Without this, the option will not be available.
• Added cycling dynamics support for 3rd party power sensors.
• Updated smart notification categories. In the phone settings, social and other smart notification categories can be enabled. This will make the Edge show notifications from other applications depending on how they are categorized by Garmin Connect Mobile. Apps like WhatsApp, GroupMe, and Twitter may show up under social and things like e-mail, calendar, and news may show up under other. These categories are off by default and must be enabled to be seen.
• Fixed an issue causing cadence and power data dropouts.
• Updated indoor trainer UI to properly disable GPS when activated and no longer try to calculate routes while active.
• Fixed issue where FTP data would not be uploaded to Garmin Connect correctly.
• Fixed crash when doing a calculation with automotive routing selected.
• Added ability to select CIQ data fields on the map page.
• Added prompt to indicate when a course has more course points than are supported by the device.
• Fixed issue with transmitting front and rear gear information to the Varia Vision.
• Added ability to stop the course from the course review page of the active course to make it easier to reactivate a course.
• Updated the incident detection interface to better indicate when the user is trying to dismiss the page by holding the specified area.
• Fixed crash when using Varia Vision with workouts.
• Fixed issue where the GPS data field did not match the GPS indicated by the status bar.
• Fixed issue when coming out of mass storage mode that could cause a crash.
• Added the current software version to the power on page.
• Fixed issues with device transfers.
• Completing a segment will now turn on the backlight.
• Added a minimum scale to the altimeter page so that small elevation ranges are reflected properly.
• Fixed elevation zooming issue with large courses/activities/segments (>100mi or km).
• Updated radar tone to be easier to hear.
• Minor graphics improvements.
• Minor bug fixes and stability improvements.
• Minor CIQ improvements.

Edge 820 software version 11.01 Beta
as of April 23, 2019

Download (10.69 MB)

Code:

Please Login or Register to see the links

Changes made from version 11.00 to 11.01:
� Added support for 12-speed shifting sensors.
� Fixed data field issues when using a shifting system with no front derailleur.
� Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
� Updated RTL510 and RTL500 light modes for Auto and Trail modes.
� Fixed Varia lights not activating when starting an activity.
� Made several improvements to the Sensor Details UI for Vector 3 power meters.
� Fixed average power balance data field not working correctly.
� Added the option to choose the radar alert tone.
� Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
� Fixed an issue where going through the data screen flow would automatically enable the screen.
� Fixed an issue preventing the device from manually connecting to a network SSID.

Code:

Please Login or Register to see the links

Edge 820 software version 11.10
as of May 7, 2019

â–¶ Serial Port
Download (16.07 MB)

Code:

Please Login or Register to see the links

â–¶ USB Card Programmer
Download (16.07 MB)

Code:

Please Login or Register to see the links

Changes made from version 11.00 to 11.10:
� Added support for 12-speed shifting sensors.
� Fixed data field issues when using a shifting system with no front derailleur.
� Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
� Updated RTL510 and RTL500 light modes for Auto and Trail modes.
� Fixed Varia lights not activating when starting an activity.
� Made several improvements to the Sensor Details UI for Vector 3 power meters.
� Fixed average power balance data field not working correctly.
� Added the option to choose the radar alert tone.
� Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
� Fixed an issue where going through the data screen flow would automatically enable the screen.
� Fixed an issue preventing the device from manually connecting to a network SSID.

Code:

Please Login or Register to see the links