Thank you for the reply.I can not get into pre boot mode. The garmin screen comes on and that is as far as the unit goes. If I hold the top left and connect the mini usb to the rear the computer goes ding dong and the pc starts to install drivers but never detects the unit under computer?

As for your other point I have read but am struggling to understand.


1) Bricked device MODEL, Firmware version, HWID.

1360 LMT, dont know dirmware or HWID?

2) Why and how the device got bricked.

Failed to update. Drive error.

3) Symptoms: what's wrong in your device?

Hung on Garmin screen.

4) Does your pc sees your device ?

Kind oF?

5) List all the procedures you already tried to unbrick it and their results and errors messages obtained.

Just pushing all over the screen and attmepting to get to the facory reset.

6) Do you have Garmin USB Drivers installed ? Garmin: USB Drivers Updates & Downloads

Yes.

7) If you don't know HWID get it by Use program G7ToWin to retrieve your HWID

Not sure how to do this as my PC doesnt see the unit.

8) Write down if you already read or tried GarminCure3 tool - the new way to create cure firmwares for Garmin devices
How to unbrick a nüvi - step by step guide

Tried this but cant find firmware for my unit GXC??

9) Can you reach preboot mode? If no ,have you followed this? Garmin Updater.exe v.2.8.0

Dont think so see above.

10) Probably no , but do you have NV backup?

i have files listed in a backup sub folder of Garmin is this what you mean?

11) Once you get a reply and a procedure to follow from our experts, please give an accurate reply about what you did and obtained results.