Hello everyone,

I have this 265W that crapped out on me more then 3 years ago. At that time I have put it through a lot trying to fix it, diff sw ver, diff hwid, mix and match, you name it.... Can be seen here
Code:
Please Login or Register to see the links
Current status:
Turn it on, I see GARMIN logo then White screen for about 7 seconds and it loops.

Updater can not fully load any firmware original or cure. No go with GarminCure3 or QuickCure3-with-flasher.

So I patched v7.60 boot.bin 00000010 0C 80 A0 E1 to E3, and created boot.bin only RGN and flashed it using updater.exe

To my surprise, original Ldr.bin on SD is alive!!!

Code:
Please Login or Register to see the links
I was able to backup the important region 5, 41, stuff.

As I write this, I executed these commands and its been going for 30+ minutes.
Code:
Please Login or Register to see the links
Video of what I see
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

I don't know what to try next. Could some advise please. Maybe I still have a chance to unbrick it.