Likes: 
When you flashed the cure fw, did you keep firm constant pressure on the top LH corner of the screen at least until you saw 'Loader' appear on the unit's screen? If you don't hold firmly until that point, the unit will try again to go to MSM which it cannot do. Is there any error message from updater.exe after the unsuccessful flash attempt when you hear the Windows 'ding' sounds?Originally Posted by StBaumy
Try to access preboot after you have the cure fw loaded to updater.exe with the radio button selected for 'USB device'. Hold the upper LH screen corner and then plug in the usb lead to the nuvi [use a back usb port of your PC if possible]. Immediately you see the nuvi details appear in the window next to 'USB device', press OK on updater.exe and keep holding the screen.
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 18
Hybrid View
-
13th February 2014, 03:52 AM #1Garmin/GPS Systems GMod.
- Join Date
- Aug 2011
- Location
- Oz.
- Posts
- 6,189
- Rep Power
- 2501
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
-
13th February 2014, 04:33 AM #2Junior Member
- Join Date
- Feb 2014
- Location
- United States
- Posts
- 6
- Rep Power
- 0
I held the top left corner till it hit the loader and I even did throughout the whole process after that didn't work. It always says that the flash was successful. It first pops up the box that says updating. At this point my nuvi flashes white and makes the disconnect sound. Immediately after this it reconnects and pops up the updating box again. The nuvi then says loader and then software loading. Once this is done it states that the update was successful. I left it plugged in following the directions on the GarminCure topic but my computer never recognizes it and it restarts itself after about 45 seconds. I attached a picture below to show the update box that I am talking about.
[Only registered and activated users can see links. ]
Reply With Quote
Bookmarks