Edge 810 software version summary



model unit2

Code:
Please Login or Register to see the links
Mirrors on Perry
Code:
Please Login or Register to see the links



Edge 810 software version 3.62 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.60 to 3.62:
◦Fixed an issue where turn prompts where not always being displayed for valid turns on course routes.
◦Fixed an issue where the auto pause feature was not correctly pausing the timer when the user stops moving.
◦Fixed an issue where segments which were disabled on the device were being reset to enabled if the leader board was updated by Garmin Connect.

Edge 810 software version 3.60
Code:
Please Login or Register to see the links
Changes made from version 3.40 to 3.60:
◦Improved connection stability with Garmin Connect Mobile and fixed sync issues.
◦Made several improvements to course routing and general course experience.
◦Implemented improvements for torque effectiveness, pedal smoothness, and cycling dynamics data. This includes a fix for displaying torque effectiveness and pedal smoothness data in summary pages for left side only power meters.
◦Fixed several issues with data fields displaying incorrect data.
◦Fixed an issue where the backlight time out was not being observed when the Edge is plugged into external power.
◦Fixed several issues with Where To? search functionality.
◦Added battery percentage to the Shimano Di2 sensor about page.


Edge 810 software version 3.45 Beta.
Code:
Please Login or Register to see the links
Changes made from version 3.43 to 3.45:
◦Implemented improvements for Torque Efficiency, Pedal Smoothness, and cycling dynamics data. This includes a fix for displaying Torque Efficiency and Pedal Smoothness data in summary pages for left side only power meters.
◦Fixed an issue where the backlight time out was not being observed when the Edge is plugged into external power.
◦Implemented improvements to turn detection to allow turn prompts to be pushed for as many turns as possible during course navigation.
◦Added battery percentage to the Shimano Di2 sensor about page.


Edge 810 software version 3.43 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.41 to 3.43:
◦Fixed several issues with Where To? search functionality.
◦Fixed several issues with data fields displaying incorrect data.
◦Improved connection stability with Garmin Connect Mobile to fix sync issues.

Edge 810 software version 3.41 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.40 to 3.41:
◦Made several improvements to course routing and general course experience.


Edge 810 software version 3.40
Code:
Please Login or Register to see the links
Changes made from version 3.20 to 3.40:
◦New feature! Added Segment support.
◦To use segments, go to connect.garmin.com to find or create segments. Then, connect the device to your computer via USB cable and send the segments to your device. Once your segments have been downloaded to the device, disconnect from your computer. Then press the folder icon > Segments to access the list of segments on your device. After sending segments to your device, simply go ride through them to see the on-device experience!
◦New feature! Added Edge Remote sensor support.
◦New feature! Added Shimano Di2 sensor support with Dura Ace remote controls.
◦New Feature! Added Vector Cycling Dynamics support that adds data fields and data recording for Power Phase (PP) and Platform Center Offset (PCO).
◦Improvements to the elevation profile to fit the data to the graph and display upcoming elevation while riding a course or segment.
◦Added a stop button on the map page. This button is used to stop a currently running course or segment and is only displayed if one of those features is in use.
◦Added turn guidance and off course warnings settings for courses. These can be accessed through the menu button in the bottom right corner of the course list page. (Folder icon > Courses > Menu Button)
◦Fixed uploads over Garmin Connect Mobile. Phone pairing information has been reset and will need to be setup again.
◦Made several improvements to elevation profile zooming and scrolling.
◦Fixed a shutdown when using 'Back to Start.'
◦Added options menus to the Course, Segment, and Workout lists.
◦Added file searching for Courses, Segments, and Workouts.
◦Added Time Ahead/Behind and Distance Ahead/Behind as configurable data fields on all timer loop pages.
◦Added the ability to edit segment map data fields.

Edge 810 software version 3.28 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.24 to 3.28:
◦Several changes to the elevation profile to improve zooming and scrolling.
◦Fixed a shutdown when using 'Back to Start.'
◦Fixed several issues with editing Shimano Di2 gear setup.
◦Added options menus to the Course, Segment, and Workout lists.
◦Added file searching for Courses, Segments, and Workouts.
◦Fixed pairing issues with Shimano Di2 shifters.
◦Added Time Ahead/Behind and Distance Ahead/Behind as configurable data fields on all timer loop pages.
◦Added the ability to edit segment map data fields


Edge 810 software version 3.24 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.23 to 3.24:
◦Fixed uploads over Garmin Connect Mobile. Phone pairing information has been reset and will need to be setup again.

Edge 810 software version 3.23 Beta
Code:
Please Login or Register to see the links
Changes made from version 3.20 to 3.23:
◦New feature! Added Segment support.
◦To use segments, go to connect.garmin.com to find or create segments. Then, connect the device to your computer via USB cable and send the segments to your device. Once your segments have been downloaded to the device, disconnect from your computer. Then press the folder icon > Segments to access the list of segments on your device. After sending segments to your device, simply go ride through them to test the on device experience!
◦New feature! Added Edge Remote sensor support.
◦New feature! Added Shimano Di2 sensor support.

Edge 810 software version 3.00
Code:
Please Login or Register to see the links
Changes made from version 2.90 to 3.00:
◦Changes for manufacturing.

Edge 810 software version 2.80
Code:
Please Login or Register to see the links
Changes made from version 2.70 to 2.80:
◦New Feature! Added VIRB Remote support.
◦Added the ability to turn SRM power sensor auto zeroing on and off.
◦Improved SD card transfer speed.
◦Fixed a shutdown when creating bike profiles with language set to Portuguese.
◦Fixed an issue causing address searches to not work with language set to French.
◦Fixed an issue with Smart Recording.
◦Made improvements to Virtual Partner UI.
◦Fixed an issue with Battery % data field.
◦Made improvements to turn review UI when following a course.
◦Fixed an issue causing Auto Lap banners to not be shown.



Edge 810 software version 2.60
Code:
Please Login or Register to see the links
or
[Only registered and activated users can see links. ]
Changes made from version 2.50 to 2.60:
Made improvements to protect against ANT+ sensor dropouts.
Improved course navigation without routable maps.
Improved Back to Start.


Edge 810 software version 2.40
Code:
Please Login or Register to see the links
Changes made from version 2.30 to 2.40:
Improved power data recording.
Added support for TCX courses.
Added support for heart rate graph data field.
Added Training Plans support.
Improved elevation recording.
Improved elevation page visibility.
Fixed 30 second vertical speed average data field.
Fixed issue with phone connections.
Improved compass page.
Updated power zone defaults and added functionality to reset to default values.
Restricted a software update from taking place if the battery is below 10% capacity.
Added press and hold shortcuts to bike and activity profiles from the home screen.
Added weather icon to Connections page.
Updated translations.


Edge 810 software version 2.40
Code:
Please Login or Register to see the links
Changes made from version 2.20 to 2.30:
Added activity based routing capabilities.
Added 'minimize ascent' routing calculation method.
Fixed issues uploading rides through Garmin Connect Mobile.
Fixed connection issues with Garmin Connect Mobile.
Fixed issues with display of weather data and alerts.
Improved display of current ride on map.
Fixed issues with course points and course lists.
Fixed shutdowns related to navigation.
Ensure auto power down prompt is shown prior to powering off.
Fixed shutdown when viewing About page with European City Navigator maps.
Fixed occasional lockup during startup on 'Loading Profiles'.
Fixed issues changing GPS modes.
Added prompt to inform user of elevation calibration to user location.
Fixed an issue with Locations not being saved.
Corrected shutdown when entering battery charge mode.
Made improvements to lap summary training page.
Fixed issue loading multiple tracks at one time from Basecamp.
Updated translations.



Mirrors:

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]