Hi Neil ,
Appears to have Tried to boot as you suggested ......
I now have a 16 backup.bin file , But how do I attach it to this message ??
The images look ok in GIR_Editor:
They are the same size/resolution as the images in my AU1690 so your two EU1690s should have the same as well. You could substitute the 4 x PNG's and try reflashing the logo bin. Do you need help with that? If flashing the logo bin containing 'known good' images doesn't work then the problem is elsewhere and the device may need to be cured with [Only registered and activated users can see links. ].
EDIT: Not only are the images the same, i've found that the logo bins are the same. So just flash your 1690 logo to the 1695, or even easier for you, i'll upload the logo bin and attach it in Post #1 here.
Attached here too:Spoiler:
Last edited by Neil; 4th October 2013 at 08:30 AM. Reason: Add note.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
great news ..
I would appreciate info on how to flash the logo.bin you supplied to my 1695
Thanks again
Seeing its writing to microSD, it should also flash from it. So extract this rar file onto a clean card: [Only registered and activated users can see links. ] and proceed as before. If this is successful the unit should boot up afterwards.
If it won't flash from the card, extract this file somewhere convenient on your PC: [Only registered and activated users can see links. ], open updater folder then drag 118801000320.rgn onto updater.exe and flash it normally. Instructions are as per Step 2 in [Only registered and activated users can see links. ] of this thread.
If neither works, then it'll need a cure fw.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Hi
Tried From SD card & then when I try updater , "no usb devices available "
But I am going to try again in case I am doing something wrong
'There are no USB devices available' message means the unit is not in preboot. If it can write to the card and display the logo it can reach preboot. Try this: Drag the rgn file onto updater.exe and leave it open and visible on your desktop. Select the radio button next to 'USB Device' on updater.exe. Plug a usb lead into a rear port of your PC [not into the nuvi yet]. Ensure the nuvi is fully OFF. Hold the upper LH corner of the screen and then plug in the mini usb to the nuvi, keep holding the screen. When you see the unit's detail appear in the window next to 'USB Device' click OK, still holding the screen at least until you see the word 'Loader' appear on the upper part of the screen. If you can't see the word because of the state of the logo pic, just keep holding until the process is finished.
PS: One more thing, you have got Garmin USB Drivers installed on that PC, i hope:
Code:Please Login or Register to see the links
Last edited by Neil; 4th October 2013 at 11:44 AM. Reason: Add PS.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Hi Neil ,
Yes I have Garmin Usb Drivers installed...
Followed your instructions and it worked Ok ,
However the startup logo problem screen still appears, I am certain I noticed Something about software loading and % sign below where is now says "trouble finding satellites, Continue ? "
thanks
[Only registered and activated users can see links. ]
Last edited by mallard2; 4th October 2013 at 12:34 PM. Reason: sorry about the triple images
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
OK, will do ........am I to use the RGN you supplied & if so as a cure ?
Bookmarks