Thread: GarminCure3 tool - the new way to create cure firmwares for Garmin devices

Structure seems ok but best to uncheck 'Hide extensions for known file types' under Windows Folder Options>View so that you can be sure they are correctly named.

If it cannot read from/write to the card or enter pre-boot then there's no way to run commands or re-flash of course. But we'll not give up just yet.

Your folder naming of '1327' is assuming that the unit's HWID has remained as the original Indonesian. But that depends on how you flashed the US fw to it i.e. did you flash complete US fw or hybrid of ID boot.bin with US fw_all.bin. So some questions:

1. What did you flash, hybrid or complete?
2. What version/s?
3. How did you name the flash, ie: conventionally as 132701000xxx.rgn [where xxx is fw version e.g. 490], or did you use some other name?

I'd be somewhat concerned if you've managed to flash US fw because your device has a different PCB P/N to the US 24x5 series which has HWID 1371. The different HWID is not concerning, but the mismatching PCB P/Ns usually means a complete lack of compatibility between the hardware and firmware. Looking at the comparison:



PS: Speak a little 'strine' do you neighbour? G'day back....