Thread: GarminCure3 tool - the new way to create cure firmwares for Garmin devices

Originally Posted by seixasdf

Hi!

Kunix,

I need your help with my nuvi 1490 (0972, v6.20).

My case: I formated the memory of gps nuvi 1490.

I followed your excellent tutorial as far as I could.

What I have so far: access to gps files, the SD memory card, move the backup files to the gps memory, format the SD card (FAT32), updated the gps with WebUpdater, and MapInstall Express.

If I plug the GPS into the USB from my computer, without pressing the upper left corner, I can use MapSource, GarminExpress, WebUpdater, MapInstall, etc. ..
Unable to update the GPS with WebUpdater and GarminExpress.

What is happening: When I disconnect the GPS from the computer it will not forward stands on Garmin logo.
It seems I am missing some startup procedure or there is some error that prevented it. The GPS does not access the route and other functions, the GPS does not leave the Garmin logo.

Thank you very much.

You must now flash with Garmincure3 in Original Mode

Originally Posted by seixasdf

Garmincure3 performed in the original mode not started, the Garmin gps stopped immediately.

Which file should I use Garmincure3 in Original Mode?

Your original gupdate.gcd (the same one that you used to make the cure.)

Format the internal drive with rmprepusb as instructed in the tutorial and create an empty folder named Garmin before flashing original.