Likes: 
As Alexander2010 says, a Power Cable is one having a 12KOhm resistor connecting the GND and the ID pins. So maybe your problem is due to some current leak either in the cable or in the nuvi. Then try using other cables and/or cleaning both USB connectors. If it still doesn't help then I can try to make a firmware patcher that forces entering the flash drive mode when a Power Cable is connected. However, this wouldn't be comfortable in everyday use.
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 651
Hybrid View
-
7th April 2012, 02:27 PM #1Navigation software Moderator
- Join Date
- Sep 2011
- Location
- Belarus
- Posts
- 908
- Rep Power
- 440
Last edited by kunix; 7th April 2012 at 02:35 PM.
-
7th April 2012, 02:46 PM #2Member
- Join Date
- Sep 2010
- Location
- colombia
- Posts
- 28
- Rep Power
- 0
Well, iīve already tested with 4 different cables and in every port in my PC, with the same result. As said it works fine after cure FW but not after original FW is flashed.
Any help is trully apreciated.
thanks again.
-
10th April 2012, 02:12 AM #3Member
- Join Date
- Sep 2010
- Location
- colombia
- Posts
- 28
- Rep Power
- 0
well, followed instructions, still nothing... device not detected by PC.
weird huh
Can you really do this? itīs worth to try.
Originally Posted by kunix
-
10th April 2012, 08:57 AM #4GPSPower Helper
- Join Date
- Feb 2011
- Location
- Global
- Posts
- 1,025
- Rep Power
- 376
You will have a problem using it with a Car Power supply if the sofware is patched to enter USB Mode with a Charger Cable.
-
10th April 2012, 10:40 PM #5Member
- Join Date
- Sep 2010
- Location
- colombia
- Posts
- 28
- Rep Power
- 0
right... so? what now? i donīt know what else to do...
-
11th April 2012, 11:38 AM #6GPSPower Helper
- Join Date
- Feb 2011
- Location
- Global
- Posts
- 1,025
- Rep Power
- 376
Reply With Quote
Bookmarks