GarminCure3 tool - the new way to create cure firmwares for Garmin devices

**bobokom** · 4th November 2013, 12:32 AM

Ok. I download all with webupdater, made hard reset, choose Bulgaria and now I will wait and write what` happend.
Thank you!

Now no connection with satellites for more than one hour. Any idea what to do?

**kunix** · 4th November 2013, 07:52 AM

Well, this is strange. Messing with the internal flash drive shouldn't prevent your device from seeing satellites.
Maybe this problem was present before?

Try running the following utility:
[Only registered and activated users can see links. ]
Recently it turned out, it removes some statellite info from NV memory.

**bobokom** · 4th November 2013, 11:18 AM

I tried to open the device in ingeneering mode, but I have no luck.I downloaded the driver mentioned in the post Disable Nuvi Map Update Message and install it, but the device is not seen from my pc. I am running Windows XP SP3. Is there another driver for Windows XP?

**kunix** · 4th November 2013, 11:32 AM

There is only one such driver. Try again using "battery" menu. Be aware that when in the "battery" meny, your device SHOULD NOT be seen as a flash drive.

**Redrock3** · 4th November 2013, 09:02 PM

If you have North American maps loaded and you are in Bulgaria, that could also be a problem.

**bobokom** · 5th November 2013, 07:09 AM

I have gmappsup.img also for Europe CN2014.30.
I have installed Garmin usb driver, but I can`t run file start.bat. I try to as administrator also in Windows XP and 7
There is a error:
C:\>mupd-clr.exe
map updater message remover v0.1 by kunix
Inicializing USB...
ERROR: error while SetupDigetDeviceInterfaceDetail
What I am doing wrong?

**kunix** · 5th November 2013, 10:44 AM

Ah, I've forgotten that 37xx can't be seen in Garmin USB mode in the battery menu.
Let's try another magic.
Unpack the Garmin folder to the root of an SD card. [Only registered and activated users can see links. ]
Insert the SD card, turn on the device, wait until it reboots and prints "LOADER", then wait 10 minutes.
Then send SD:/Garmin/Updater/1101/update.log to me in private.

**kunix** · 5th November 2013, 06:12 PM

So, we've just erased your device's nonvol memory. Please keep that 41-backup.bin file.
Now your devices shows 37xx instead of 3790 when booting. Don't worry, it's okay.
Now try to acquire satellites. I hope nonvol erasing would help.

**bobokom** · 5th November 2013, 06:41 PM

How long I must wait for connection to satellites?
There are some shots from the device:[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]