City Navigator Europe NT 2013.30

**Pussola** · 26th October 2012, 01:38 PM

From unl image in post #12 I get 'no map data available' when I try to enter an address.

Any hint ?

**catymag** · 26th October 2012, 01:47 PM

Have you got satellite signal ? Does your nuvi sees the map, is it in Maps list?

**Neil** · 26th October 2012, 02:08 PM

Originally Posted by Alexis_

I've checked junction view & it seems that D2504100A.JCV is not the right file for 34xx. Can anyone suggest which file should be used instead?

Originally Posted by Neil

Like Giomen said, use the unicode version for 34xx (and for that matter any of the 3xxx series, also 2xxx and 30/40/50). The JCV file for your 34xx to use with [Only registered and activated users can see links. ] is D3048080A.

Originally Posted by dasilvarsa

@Neil

Although I think that the above is good advice, I would also like to clarify that NT Maps do work perfectly with the 3490 as well......

@dasilvarsa
Agree with that 100%, NT will work just as well as an NTU in all those units I quoted not just 34xx. In AU all those models have NT with all the other associated files as standard. No NTU for AU (not enough Cyrillic users here), but now there is Pan-Africa NTU, who knows, maybe there'll be NTU here and in America too soon. In this case it was about getting Alexis_ a working JCV file, and also tying in with the advice given by Giomen as he wanted SID files as well.

Originally Posted by Giomen

Originally Posted by Alexis_

Can anyone share .SID files for 34xx?

.......This map is not intended for 34xx. Go to:
[Only registered and activated users can see links. ]

Thanks for the clarification though, it's a valid point.

**Pussola** · 26th October 2012, 02:33 PM

Yes, I see it correctly indicated in the map list, and selected.
It is a 1490T model.

It worked with 2013.20

I am using it indoor, so no satellite signal.
Still no problems when I select US map 2013.20.

**catymag** · 26th October 2012, 02:40 PM

Try to get satellites. Have you used it in the US recently?

**Pussola** · 26th October 2012, 03:31 PM

Yes, I did and it worked correctly (same with EU 2013.20).
I tried it with satellites, the answer I get is: map data not available (sorry I wrote it wrong the first time).
I do not reach the screnn where I can input the name of the city or change country.
It works with other maps I currently have on 1490T.

**catymag** · 26th October 2012, 04:34 PM

After getting the satellites can you see the CNEU map on nuvi screen? If yes ,first make an hard reset clearing non vol (backup your data first) then try to pan CNEU map in simulation , put your position in the map, then retry to search.

Btw is always better to download original locked Mapsource, unlock it, build your map and send to your device to avoid any problem....as usual

**smokefree** · 26th October 2012, 04:58 PM

Originally Posted by catymag

Originally Posted by smokefree

@Neil

Thanks for your quick response. Indeed I am aware the method described will result in an .img file which still has GMA restrictions. It's just my way of creating a locked .img file via MapSource / MapInstall and then unlocking it at the speed of sound with gimgunlock.

The problem encountered seems to be caused by MapInstall rather than the map itself. I will work through your suggestions and report back with my findings.

Patch new Mapinstall as suggested by Neil

I ran MapInstall a third time earlier today to again try to create an .img file of the whole of Europe. This time destination not the SD card but one of the hard drives. It took over 6 hours to complete successfully, but at least it did. Not sure if it would eventually have completed sending it to the SD card (as tried before) if I had given it enough time. But sure, 6 hours is not normal. In any case I will update MapInstall to the [Only registered and activated users can see links. ] which apparently comes bundled with this latest MapSource version of CNE.

**Ipmark** · 26th October 2012, 05:39 PM

Torrents on TPB

Garmin City Navigator Europe NT 2013.30 Unlocked for Mapsource

Install the package running the CNEUNT2013_30Update.msi file, the setup will install BaseCamp and MapInstall too: replace the original exes with the patched ones.

Maps are already unlocked.

File list in the package:

Garmin CN Europe NT 2013.30 Mapsource Unlocked.rar

BaseCamp v4.0.2 Patched exe.rar
MapInstall v4.0.3 Patched exe.rar

MapSource v6.16.3.rar (Original installer)
MapSource v6.16.3 Patched exe.rar

Garmin City Navigator Europe NT 2013.30 3D-ASR-SQL-G2S-JCV

CNEUNT2013.30_3DBuildings_Unlocked.rar
CNEUNT2013.30_ASR.rar
D2331110A.G2S.rar
D2504100A.JCV.Hi-Res.rar
D3084070A.JCV.Low-Res for A50_Nuvi1xxx.rar
D317400.DB.SQLite.rar

Garmin City Navigator Europe NT 2013.30 Unlocked IMG Map

Full unlocked map of Garmin City Navigator Europe NT 2013.30 release.

Works on all Garmin devices that support NT maps.

This map can be viewed on the PC using BaseCamp (included).
The map must be copied in an USB drive, Garmin folder.

Garmin City Navigator Europe NT 2013.30 Unlocked IMG Maps

List of unlocked maps from Garmin City Navigator Europe 2013.30 release.
Works on all Garmin devices that support NT maps.

Map list of the package:

Garmin Benelux NT 2013.30 Unlocked IMG.rar
Garmin Cze-Pol-Svk NT 2013.30 Unlocked IMG.rar
Garmin Esp-Por NT 2013.30 Unlocked IMG.rar
Garmin Est-Lat-Lit-Bel NT 2013.30 Unlocked IMG.rar
Garmin France NT 2013.30 Unlocked IMG.rar
Garmin Ger-Den NT 2013.30 Unlocked IMG.rar
Garmin Greece-Turkey NT 2013.30 Unlocked IMG.rar
Garmin Ice-Ire-UK NT 2013.30 Unlocked IMG.rar
Garmin Alb-ExYug NT 2013.30 Unlocked IMG.rar
Garmin Italy NT 2013.30 Unlocked IMG.rar
Garmin Nor-Swe-Fin NT 2013.30 Unlocked IMG.rar
Garmin Rom-Bul-Hun-Mol-Ukr NT 2013.30 Unlocked IMG.rar
Garmin Swi-Aus NT 2013.30 Unlocked IMG.rar

Garmin Western Europe NT 2013.30 Unlocked IMG.rar
(Fra-Ger-Den-Esp-Por-Benelux-UK-Ire-Ita-Aus-Swi-Iceland-Greece)

Garmin Eastern Europe NT 2013.30 Unlocked IMG.rar
(Rom-Bul-Hun-Mol-Ukr-Est-Lit-Lat-Bel-Cze-Pol-Svk-ExYug-Alb-Tur)

Maps can be viewed on the PC using BaseCamp (included).

**Giomen** · 27th October 2012, 01:58 AM

Originally Posted by dasilvarsa

I would also like to clarify that NT Maps do work perfectly with the 3490 as well.(if you can get the correct subfiles of course.)
I've just recently bought a 3490LMT here in South Africa and the Preloaded Map is CNSA2013.30 NT not NTU.

It would be awful if newest device do not read a not-Unicode maps! But as you know we lack in the case of using a not-Unicode version a some features! Garmin especially understrike this features as a huge advantage in model of 2012. Let's not to hurt the old man

At least I know two examples of such offenders. The first, fisherman uses a 3590 on snowmobile only with the oldest converted version of marine chart and he loves this device for the big screen and function "off" after a preset time. The second, dogman uses a 3490 with a tracker function only for communication with his dog GSM collar and he uses the old version of NT map principally (it seems that the new or another version is not as accurate).

Thread: City Navigator Europe NT 2013.30

Thread Tools

Display

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions